No abstract

No abstract

ElsevierBenajes Calvo, JV.; García Martínez, A.; Monsalve Serrano, J. (2015). Effects of direct injection timing and blending ratio on RCCI combustion with different low reactivity fuels. Energy Conversion and Management. 99:193-209. doi:10.1016/j.enconman.2015.04.046. Effects of Direct injection timing and Blending Ratio on RCCI combustion with different Low Reactivity FuelsEnergy Conversion and Management, Volume 99, 2015, Pages 193-209. http://dx.doi.org/10.1016/j.enconman.2015 AbstractThis work investigates the effects of the direct injection timing and blending ratio on RCCI performance and engine-out emissions at different engine loads using four low reactivity fuels: E10-95, E10-98, E20-95 and E85 (port fuel injected) and keeping constant the same high reactivity fuel: diesel B7 (direct injected). The experiments were conducted using a heavy-duty single-cylinder research diesel engine adapted for dual-fuel operation. All the tests were carried out at 1200 rpm. To assess the blending ratio effect, the total energy delivered to the cylinder coming from the low reactivity fuel was kept constant for the different fuel blends investigated by adjusting the low reactivity fuel mass as required in each case. In addition, a detailed analysis of the air/fuel mixing process has been developed by means of a 1-D in-house developed spray model.Results suggest that notable higher diesel amount is required to achieve a stable combustion using E85. This fact leads to higher NOx levels and unacceptable ringing intensity. By contrast, EURO VI NOx and soot levels are fulfilled with E20-95, E10-98 and E10-95. Finally, the higher reactivity of E10-95 results in a significant reduction in CO and HC emissions, mainly at low load.

Achieving clean and efficient engine operation up to full load by combining optimized RCCI and dual-fuel diesel-gasoline combustion strategies. Energy Conversion and Management.

Diesel engines are the most commonly used internal combustion engines nowadays, especially in European transportation. This preference is due to their low consumption and acceptable driveability and comfort. However, the main disadvantages of traditional direct injection Diesel engines are their high levels of noise, nitrogen oxides (NO x ) and soot emissions, and the usage of fossil fuels. In order to tackle the problem of high emission levels, new combustion concepts have been recently developed. A good example is the premixed charge compression ignition (PCCI) combustion, a strategy in which early injections are used, causing a burning process in which more fuel is burned in premixed conditions, which affects combustion noise. The use of a pilot injection has become an effective tool for reducing combustion noise. The main objective of this paper is to analyze experimentally the pollutant emissions, combustion noise, and performance of a Diesel engine operating under PCCI combustion with the use of a pilot injection. In addition, a novel methodology, based on the decomposition of the in-cylinder pressure signal, was used for combustion noise analysis. The results show that while the PCCI combustion has potential to reduce significantly the NO x and soot emission levels, compared to conventional Diesel combustion strategy, combustion noise continues to be a critical issue for the implementation of this new combustion concept in passenger cars.