Photovoltaics (PV) output power is highly sensitive to many environmental parameters and the power produced by the PV systems is significantly affected by the harsh environments. The annual PV power density of around 2000 kWh/m2 in the Arabian Peninsula is an exploitable wealth of energy source. These countries plan to increase the contribution of power from renewable energy (RE) over the years. Due to its abundance, the focus of RE is on solar energy. Evaluation and analysis of PV performance in terms of predicting the output PV power with less error demands investigation of the effects of relevant environmental parameters on its performance. In this paper, the authors have studied the effects of the relevant environmental parameters, such as irradiance, relative humidity, ambient temperature, wind speed, PV surface temperature and accumulated dust on the output power of the PV panel. Calibration of several sensors for an in-house built PV system was described. Several multiple regression models and artificial neural network (ANN)-based prediction models were trained and tested to forecast the hourly power output of the PV system. The ANN models with all the features and features selected using correlation feature selection (CFS) and relief feature selection (ReliefF) techniques were found to successfully predict PV output power with Root Mean Square Error (RMSE) of 2.1436, 6.1555, and 5.5351, respectively. Two different bias calculation techniques were used to evaluate the instances of biased prediction, which can be utilized to reduce bias to improve accuracy. The ANN model outperforms other regression models, such as a linear regression model, M5P decision tree and gaussian process regression (GPR) model. This will have a noteworthy contribution in scaling the PV deployment in countries like Qatar and increase the share of PV power in the national power production.

This work presents a multi-course project-based learning (MPL) approach implemented using two electrical engineering (EE) interdisciplinary undergraduate courses at Qatar University. Implementing an MPL approach helps in the development of critical thinking and collaborative decision-making skills. The attainment of these skills is also the outcome of education for sustainable development (ESD); the skills help students acquire the knowledge, attitudes, and values necessary to shape a sustainable future. The participating students’ worked on a design project, which was used to assess the fulfillment of a set of student learning outcomes (SLOs), focusing on engineering soft skills and project management skills. The skills include the ability to communicate effectively, to work collaboratively in a team, to think both critically and creatively, and to manage projects efficiently with realistic constraints and standards. The challenges of implementing the MPL method are the organization of pedagogical activities that are planned for each of the courses involved, the coordination of the materials delivered by each course, and the supervision of around 90 students per year performing the MPL method. The experience of MPL deployment in the EE program was rated using student surveys. It was assumed that the MPL approach would be beneficial to the students based on the instructors’ and students’ feedback from the same courses in previous years. This was verified using chi-square statistics of the survey results. The implementation of the MPL also helped in increasing the average marks scored by the students in the design project. Some interesting feedback, statistical analyses, and improvement actions are reported for future upgrades. This work also contributes to the MPL pragmatic body of knowledge by exploring a successful initiative and its outcomes, which can help in attaining the skills needed for ESD.

This study aims developing customized novel data acquisition for photovoltaic systems under extreme climates by utilizing off-the-shelf components and enhanced with data analytics for performance evaluation and prediction. Microcontrollers and sensors are used to measure meteorological and electrical parameters. Customized signal conditioning, which can withstand high-temperature along with microcontrollers’ development boards enhanced with appropriate interfacing shields and wireless data transmission to iCloud IoT platforms, is developed. In addition, an automatically controllable in-house electronic load of the PV system was developed to measure the maximum power possible from the system. LabVIEW™ program was used to allow ubiquitous access and processing of the recorded data over the used IoT. Furthermore, machine learning algorithms are utilized to predict the PV output power by utilizing data collected over a two-year span. The result of this study is the commissioning of original hardware for PV study under extreme climates. This study also shows how the use of specific ML algorithms such as Artificial Neural Network (ANN) can successfully provide accurate predictions with low root-mean-squared error (RMSE) between the predicted and actual power. The results support reliable integration of PV systems into smart-grids for efficient energy planning and management, especially for arid and semi-arid regions.

Soiling losses of photovoltaic (PV) panels due to dust lead to a significant decrease in solar energy yield and result in economic losses; this hence poses critical challenges to the viability of PV in smart grid systems. In this paper, these losses are quantified under Qatar’s harsh environment. This quantification is based on experimental data from long-term measurements of various climatic parameters and the output power of PV panels located in Qatar University’s Solar facility in Doha, Qatar, using a customized measurement and monitoring setup. A data processing algorithm was deliberately developed and applied, which aimed to correlate output power to ambient dust density in the vicinity of PV panels. It was found that, without cleaning, soiling reduced the output power by 43% after six months of exposure to an average ambient dust density of 0.7 mg/m3. The power and economic loss that would result from this power reduction for Qatar’s ongoing solar PV projects has also been estimated. For example, for the Al-Kharasaah project power plant, similar soiling loss would result in about a 10% power decrease after six months for typical ranges of dust density in Qatar’s environment; this, in turn, would result in an 11,000 QAR/h financial loss. This would pose a pressing need to mitigate soiling effects in PV power plants.