No abstract

No abstract

We propose a novel polymer optical fiber (POF) sensing system based on fiber Bragg gratings (FBGs) to measure foot plantar pressure. The plantar pressure signals are detected by five FBGs, in the same piece of cyclic transparent optical polymer (CYTOP) fiber, which are embedded in a cork insole for the dynamic monitoring of gait. The calibration and measurements performed with the suggested system are presented, and the results obtained demonstrate the accuracy and reliability of the sensing platform to monitor the foot plantar pressure distribution during gait motion and the application of pressure. This architecture does not compromise the patient’s mobility nor interfere in their daily activities. The results using the CYTOP fiber showed a very good response when compared with solutions using silica optical fibers, resulting in a sensitivity almost twice as high, with excellent repeatability and ease of handling. The advantages of POF (e.g., high flexibility and robustness) proved that this is a viable solution for this type of application, since POF’s high fracture toughness enables its application in monitoring patients with higher body mass compared with similar systems based on silica fiber. This study has demonstrated the viability of the proposed system based on POF technology as a useful alternative for plantar pressure detection systems.

Semiconductor core fibers have numerous potential applications in optoelectronics and photonics, and the key to realizing these opportunities is controlled processing of the material. We present results on laser treatments for manipulating the core structure as well as the glass cladding. More specifically, using quasi-CW 10.6 µm radiation, the clad glass can be softened and the core can be controllably melted. This is shown to permit tapering, localized formation of optical resonators, and stress modification of the as-drawn fiber and structures within it. Shown for the first time to the authors' knowledge are Bragg gratings written by modification of the silicon/glass interface using fs laser illumination at 517 nm. The cores of these fibers show stress alterations, with indications of quasi-periodic stress relief in the glass.

No abstract