Hybrid organic-inorganic metal halide perovskites have attracted significant attention due to their excellent optical and electrical properties. However, intrinsic defects and poor carrier mobility remain two major concerns that limit...

The SnO2 electron transport layer (ETL) has been characterized as being excellent in optical and electrical properties, ensuring its indispensable role in perovskite solar cells (PSCs). In this work, SnO2 films were prepared using two approaches, namely, the ultrasonic spraying method and the traditional spin-coating, where the different properties in optical and electrical performance of SnO2 films from two methods were analyzed by UV–Vis, XRD, AFM, and XPS. Results indicate that the optical band gaps of the sprayed and the spin-coated film are 3.83 eV and 3.77 eV, respectively. The sprayed SnO2 film has relatively low surface roughness according to the AFM. XPS spectra show that the sprayed SnO2 film has a higher proportion of Sn2+ and thus corresponds to higher carrier concentration than spin-coated one. Hall effect measurement demonstrates that the carrier concentration of the sprayed film is 1.0 × 1014 cm−3, which is slightly higher than that of the spin-coated film. In addition, the best PCSs efficiencies prepared by sprayed and spin-coated SnO2 films are 18.3% and 17.5%, respectively. This work suggests that the ultrasonic spraying method has greater development potential in the field of flexible perovskite cells due to its feasibility of large-area deposition.

No abstract