Wastewater reuse presents a promising way to mitigate the risk to global water resources and achieve sustainability in water, especially in agricultural areas in the southeast of Spain, such as the Murcia region. However, the risks related to the presence of contaminants of emerging concern (CECs) or pathogenic microorganisms in wastewater treatment plant (WWTP) effluent suggest the need to implement effective and relatively low-cost tertiary treatments. With this aim, a self-sustainable pilot prototype based on three combined modules (disc-filtration, granular activated carbon (GAC) bed adsorption and UV disinfection) assisted by solar panels was installed as an alternative tertiary treatment in a conventional WWTP in the Murcia region. The obtained results clearly confirmed the efficiency of the proposed prototype for CECs removal, and showed optimal results at a workflow of 500 L/h. In all cases, high removal efficiency was obtained for the different indicator microorganisms described in the recently published Regulation (EU) 2020/741 (E. coli, F-specific coliphages, somatic coliphages, total coliphages, and Clostridium perfringens). The protection of the activated carbon by disc-filters and the energy autonomy and self-operation of the prototype resulted in an efficient and economically viable methodology for its implementation in both conventional WWTPs and in isolated areas attached to crops.

Wastewater treatment plant effluents can be an important source of contamination in agricultural reuse practices, as pharmaceuticals are poorly degraded by conventional treatments and can enter crops, thereby becoming a toxicological risk. Therefore, advanced tertiary treatments are required. Ozone (O3) is a promising alternative due to its capacity to degrade pharmaceutical compounds, together with its disinfecting power. However, mass transfer from the gas to the liquid phase can be a limiting step. A novel alternative for increased ozone efficiency is the combination of micro-nano bubbles (MNBs). However, this is still a fairly unknown method, and there are also many uncertainties regarding their implementation in large-scale systems. In this work, a combined O3/MNBs full-scale system was installed in a WWTP to evaluate the removal efficiency of 12 pharmaceuticals, including COVID-19-related compounds. The results clearly showed that the use of MNBs had a significantly positive contribution to the effects of ozone, reducing energy costs with respect to conventional O3 processes. Workflow and ozone production were key factors for optimizing the system, with the highest efficiencies achieved at 2000 L/h and 15.9 gO3/h, resulting in high agronomic water quality effluents. A first estimation of the transformation products generated was described, jointly with the energy costs required.

Today, the emergence of increasingly restrictive treatment and reuse policies make the implementation of full-scale tertiary treatment, capable of improving the quality of water, a priority. Full-scale TiO2 photocatalysis systems are resulting in a promising option, since TiO2 is commercially available. However, questions such as how to work continuously during day/night irradiation cycle, or the removing of TiO2 in outlet flow are still unresolved. In this work, a full-scale system integrating a solar CPC/UV-LED step combined with commercial microfiltration membranes was installed in a conventional WWTP for agricultural reuse purposes. After optimization, 0.5 g/L of catalyst and combined SOLAR + UV-LED showing the highest pharmaceutical removal percentages, while a self-designed UV-LED included in the own reaction tank resulting in higher efficiencies compared with commercial lamps. Longer membrane surface area decreased fouling problems in the system. However, 60 min of irradiation time was necessary to reach the most restrictive water quality values according with (EU 2020/741). After optimization step, total costs were reduced by 45%. However, it was shown that a reduction in operating and maintenance costs, along with the development of more effective and economical commercial filtration membranes is a key factor; therefore, working on these aspects is essential in the treated water cost reduction. Graphical abstract