The interaction of cesium perfluorooctanoate (CsPFO) with poly(ethylene glycol) (PEG) of different molecular weight (300 < or = MW < or = 20000 Da) has been investigated at 298.15 K by isothermal titration calorimetry (ITC), density, viscosity, and conductivity measurements. Calorimetric titrations exhibited peculiar trends analogous to those already observed for sodium dodecyl sulfate (SDS). Micelles of the perfluorosurfactant, as compared to those of SDS, yield complexes with the polymer of similar thermodynamic stability but are able to interact with shorter PEG oligomers. The average number of surfactant molecules bonded per polymer chain at the saturation is about twice that observed for SDS. ITC data at 308.15 K indicate a larger thermodynamic stability of the aggregates but an almost constant stoichiometry. The peculiar thermal effects and the viscosity trend observed during the titration of an aqueous PEG solution with the surfactant appear consistent with a conformational change of the polymer. The PEG chain would evolve from a strained to an expanded conformation, induced by the growing of the surfactant micellar clusters bonded to the polymer, as suggested in a previous study of the PEG/SDS/H2O system.

The interaction of lithium perfluorononanoate (LiPFN) with poly(ethylene glycol) (PEG) molecules of different molecular weights (300 < MW < 20000 Da) has been investigated in water at 298.15 and 308.15 K by isothermal titration calorimetry (ITC). Density, viscosity, and conductivity measurements were also performed at 298.15 K. The aggregation process of this surfactant on the PEG polymeric chain was found to be very similar to that exhibited by cesium perfluorooctanoate (CsPFO) and appears to be consistent with the necklace model. ITC titrations indicated that a fully formed LiPFN micellar cluster can be wrapped by a PEG chain having a molecular weight (MW) of approximately 3200 Da, longer than that required by the shorter perfluorooctanoate (MW approximately 2600 Da), and also suggested a stepwise mechanism for the aggregation of successive micelles. Viscosity data indicate that the formation of polymer-surfactant complexes between PEG and LiPFN involves a conformational change of the polymer. The aggregation of preformed micelles of LiPFN or CsPFO or SDS on the PEG polymeric chain always gives rise to further stabilization.

Massive quantities of marine seaweed, Ulva armoricana are washed onto shores of many European countries and accumulates as waste. Attempts were made to utilize this renewable resource in hybrid composites by blending the algal biomass with biodegradable polymers such as poly(hydroxy‐butyrate) and poly‐(ε‐caprolactone). Compression‐molded films were developed and examined for their morphological, thermal and mechanical property. The Ulva fibers were well dispersed throughout the continous matrix exhibiting considerable cohesion with both polymers. Occasionally, regions with exposed fibres or aggregates were visible. About 50% algal content seemed to be an ideal concentration, thereafter, thermal stability was impacted. A progressive decrease in melting heat (ΔHm) was observed with increased algal content as well as a decrease in the crystallinity of the polymer matrix due to the presence of the organic filler. The addition of algal fibres improved the Young modulus of the blends, creating a concomitant loss in percent elongation (El) and ultimate tensile strength. Fiber content above 40% impacted tensile property negatively and composites with over 70% fiber contents composites were too fragile. Data suggest that macro algae are compatible with both polymers and processable as fillers in hybrid blends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010

No abstract

No abstract