This experimental study focuses on various cooling strategies and lubrication-assisted cooling strategies to improve machining performance in the turning process of AISI 4140 steel. Liquid nitrogen (LN 2) and carbon dioxide (CO 2) were used as cryogenic coolants, and their performances were compared with respect to progression of tool wear. Minimum quantity lubrication (MQL) was also used with carbon dioxide. Progression of wear, including flank and nose, are the main outputs examined during experimental study. This study illustrates that carbon dioxide-assisted cryogenic machining alone and with minimum quantity lubrication does not contribute to decreasing the progression of wear within selected cutting conditions. This study also showed that carbon dioxide-assisted cryogenic machining helps to increase chip breakability. Liquid nitrogen-assisted cryogenic machining results in a reduction of tool wear, including flank and nose wear, in the machining process of AISI 4140 steel material. It was also observed that in the machining process of this material at a cutting speed of 80 m/min, built-up edges occurred in both cryogenic cooling conditions. Additionally, chip flow damage occurs in particularly dry machining.
Titanium alloy Ti-5Al-5V-3Cr-0.5Fe (Ti-5553) is a new generation of near-beta titanium alloy that is commonly used in the aerospace industry. Machining is one of the manufacturing methods to produce parts that are made of this near-beta alloy. This study presents the machining performance of new generation near-beta alloys, namely, Ti-5553, by focusing on a high-speed cutting process under cryogenic cooling conditions and dry machining. The machining experiments were conducted under a wide range of cutting speeds, including high speeds that used liquid nitrogen (LN2) and carbon dioxide (CO2) as cryogenic coolants. The experimental data on the cutting temperature, tool wear, force components, chip breakability, dimensional accuracy, and surface integrity characteristics are presented and were analyzed to evaluate the machining process of this alloy and resulting surface characteristics. This study shows that cryogenic machining improved the machining performance of the Ti-5553 alloy by substantially reducing the tool wear, cutting temperature, and dimensional deviation of the machined parts. The cryogenic machining also produced shorter chips as compared to dry machining.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.