Summary:It is an aim of the present work to determine the chemical heat flow rate of a reaction without explicitly solving the heat balance equations. Therefore, it is necessary to calculate the heat flow rate directly from the temperature course of an experimentally determined reaction. For this transformation the transfer function of the calorimeter is needed [1] . An isoperibol reaction calorimeter was used for the experiments. With different calibrations and gained transfer functions, it is shown that the chemical heat flow rate can be determined from the temperature course of a reaction. The evaluation is fast and easy to use, which improves automation and prevents possible input errors.

Summary: A transfer function of the RC1e™ (Mettler‐Toledo) calorimeter was obtained by calibration with a heating cartridge. With this function it was possible to determine the heat flow rate and total heat of different polymerization reactions. The calorimeter operates in isothermal as well as in isoperibolic mode. Additionally, 1‐vinyl‐2‐pyrrolidone and acrylic acid were polymerized in a three‐neck flask. In this common laboratory device the heat flow rate was obtained by using a transfer function calculated by calibration with a heating cartridge. Thus, the heat of polymerization can be obtained without using a calorimeter and without solving the heat balance equation.