Dual-energy subtraction is a radiographic technique for the acquisition of a material selective image by the weighted subtraction of low- and high-energy digital X-ray images. This is achieved by exploiting the energy dependence of the X-ray attenuation components in the image. This can allow the removal of background morphology to enhance the presentation of otherwise obscured details. The detection of microcalcifications in a mammogram by dual-energy techniques has previously been investigated. These investigations indicated that, using dual-energy techniques, small microcalcifications could be extracted from the background breast morphology with sufficient signal to noise ratio (SNR) to be full visualized. The authors present the extension of a theoretical dual-energy model to incorporate practical considerations and then compare the results with experimentally derived data using a commercially available computed radiography system. In particular the extended model now takes into account the energy dependent detective quantum efficiency of a system. This is thought to be a major factor in reducing the efficiency of dual-energy mammography. The theoretical model predicts that dual-exposure dual-energy mammography, utilizing HRIII image plates, could not provide a detail SNR of five for calcifications smaller than 470 mu m. The experimental results verify this and indicate that dual-energy subtraction mammography, utilizing computed radiography, is currently not a viable technique for the detection of clinically significant microcalcifications. Further advances in X-ray image detector efficiency will be required if the full potential of this technique is to be achieved.
For pediatric patients, using 0.25-0.9 mm Cu filtration in the x-ray beam while maintaining 50-55 kVp, depending on patient size, provided optimal x-ray image quality to dose ratios. These settings, adjusted for x-ray tube loading limits and clinically acceptable image quality, should provide a useful strategy for optimizing iodine contrast agent based cardiac x-ray imaging. Removing the antiscatter grid improved the FOM for the 8.5 and 12 cm phantoms, therefore grid removal is recommended for younger children. Improvement for the 16 cm phantom declined into the estimated margin of error for the FOM; the need for grid removal for older children would depend on practical feasibility in the clinical environment.
A comprehensive investigation of the physical imaging performance of a Philips AC3 computed radiography system using fifth-generation image plate technology has been undertaken. Measurements include characteristic response, modulation transfer function (MTF) and Wiener spectra (WS) for standard and high resolution image plates sampled at 10 pixels/mm. These results were used to calculate noise equivalent quanta (NEQ) and detective quantum efficiency (DQE) spectral descriptions of system performance. Luminescence noise and x-ray quantum noise components were separated. From an estimate of the luminescence noise power, the average system gain was calculated and results show a substantial improvement over earlier generations of computed radiography systems for standard image plates.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.