SUMMARYThe ability to model and predict the formation of desiccation cracks is potentially beneficial in many applications such as clay liner design, earth dam construction, and crop science, etc. However, most studies have focused on statistical analysis of crack patterns and qualitative study of contributing factors to crack development rather than prediction. Because it is exceedingly difficult to capture the nonlinear processes during desiccation in analytical modelling, most such models handle crack formation without considering variation of material properties with time, and are unattractive to use in realistic modelling. The data obtained from laboratory experiments on clay soil desiccating in moulds were used as a basis to develop a more refined model of desiccation cracking. In this study, the properties, such as matric suction, stiffness and tensile strength of soil, and base adhesion, could be expressed approximately as functions of moisture content. The initial conditions and the development of suction due to desiccation and the varying material properties were inputted to UDEC, a distinct element code, using its internal programming language FISH. The model was able to capture some essential physical aspects of crack evolution in soil contained in moulds with varying lengths, heights, and materials of construction. Extension of this methodology is potentially beneficial not only for modelling desiccation cracking in clay, but also in other systems with evolving material properties such as concrete structures and road pavements.

Granular material is commonly used as backfill and embedment material for buried structures, including thermoplastic pipe. Proper compaction of this material is crucial to the successful performance of the pipe. However, the commonly used Proctor density approach cannot be used for the field compaction control of these materials because it does not provide a well-defined moisture-density relationship. An alternative method used by the authors for compaction control of such materials is described. This method involves a device known as the dynamic cone penetrometer (DCP). Findings are presented from a series of DCP tests conducted on a range of granular backfill materials that belong to ASTM D 2321 Classes I and II. These materials were compacted using ( a) an impact rammer and ( b) a vibratory plate compactor. The level of compaction energy was varied by changing the number of passes. The data obtained from these tests are presented in the form of DCP blow count profiles, which are then used as the basis for comparison between different materials, compaction equipment, and levels of compaction energy. A series of full-scale load tests conducted on high-density polyethylene (HDPE) pipe installations is also described. An overview is provided of how the DCP data may be combined with load-deflection data from full-scale load tests to establish guidelines for compaction control of pipe backfill.

Natural rubber (NR) latex-clay nanocomposite (NRLCN) synthesized with montmorillonite (MMT) clay aqueous dispersion was evaluated for reinforcement and barrier properties. The physio-mechanical properties of the NRLCN were compared with the conventional NR latex composites containing CaCO 3. The NRLCN structure was characterized with X-ray diffraction and scanning electron microscope techniques. The X-ray diffraction data showed that, with a lower concentration of clay, a highly exfoliated clay structure was achieved whilst the clay aggregation gradually resulted in a higher concentration of clay. The crosslink density as computed based on the solvent absorption data of the latex nanocomposite films was increased with the increase of clay concentration. As a result of nanoscale dispersion of the montmorillonite clay and higher crosslink density of the latex nanocomposite films, the resistance to permeation of small molecules through the NRLCN was significantly enhanced in comparison to conventional NR latex-CaCO 3 composites. Solid state mechanical properties of NRLCNs showed a significant reinforcement effect of dispersed clay platelets but without significantly reducing the elastic properties. The higher mechanical properties and improved barrier resistance indicated that NR latex nanocomposites containing montmorillonite clay is a potential replacement for conventional NR latex composites containing CaCO 3 .

No abstract

No abstract