An optimization-based multibody dynamics modeling method is proposed for two-dimensional (2D) team lifting prediction. The box itself is modeled as a floating-base rigid body in Denavit-Hartenberg representation. The interactions between humans and box are modeled as a set of grasping forces which are treated as unknowns (design variables) in the optimization formulation. An inverse-dynamics-based optimization is used to simulate the team lifting motion where the dynamic effort of two humans is minimized subjected to physical and task-based constraints. The design variables are control points of cubic Bsplines of joint angle profiles of two humans and the box, and the grasping forces between humans and the box. Analytical sensitivities are derived for all constraints and objective functions including the varying unknown grasping forces. Two numerical examples are successfully simulated: one is to lift a 10 kg box with the center of mass (COM) in the middle, and the other is the same weight box with the COM off the center. The humans' joint angle, torque, ground reaction force, and grasping force profiles are reported. Reasonable team lifting motion, kinematics, and kinetics are predicted using the proposed multibody dynamic modeling approach and optimization formulation.

In this paper, an optimization-based dynamic modeling method is used for human-robot lifting motion prediction. The three-dimensional (3D) human arm model has 13 degrees of freedom (DOFs) and the 3D robotic arm (Sawyer robotic arm) has 10 DOFs. The human arm and robotic arm are built in Denavit-Hartenberg (DH) representation. In addition, the 3D box is modeled as a floating-base rigid body with 6 global DOFs. The interactions between human arm and box, and robot and box are modeled as a set of grasping forces which are treated as unknowns (design variables) in the optimization formulation. The inverse dynamic optimization is used to simulate the lifting motion where the summation of joint torque squares of human arm is minimized subjected to physical and task constraints. The design variables are control points of cubic B-splines of joint angle profiles of the human arm, robotic arm, and box, and the box grasping forces at each time point. A numerical example is simulated for huma-robot lifting with a 10 Kg box. The human and robotic arms’ joint angle, joint torque, and grasping force profiles are reported. These optimal outputs can be used as references to control the human-robot collaborative lifting task.

A novel multibody dynamics modeling method is proposed for two-dimensional (2D) team lifting prediction. The box itself is modeled as a floating-base rigid body in Denavit-Hartenberg representation. The interactions between humans and box are modeled as a set of grasping forces which are treated as unknowns (design variables) in the optimization formulation. An inverse-dynamics-based optimization method is used to simulate the team lifting motion where the dynamic effort of two humans is minimized subjected to physical and task-based constraints. The design variables are control points of cubic B-splines of joint angle profiles of two humans and the box, and the grasping forces between humans and the box. Two numerical examples are successfully simulated with different box weights (20 Kg and 30 Kg, respectively). The humans’ joint angle, torque, ground reaction force, and grasping force profiles are reported. The joint angle profiles are validated with the experimental data.

No abstract

Wearable robots, sometimes known as exoskeletons, are incredible devices for improving human strength, reducing fatigue, and restoring impaired mobility. The control of powered exoskeletons, on the other hand, is still a challenge. This necessitates the development of a technique to simulate exoskeleton–wearer interaction. This study uses a two-dimensional human skeletal model with a powered knee exoskeleton to predict the optimal lifting motion and assistive torque. For lifting motion prediction, an inverse dynamics optimization formulation is utilized. In addition, the electromechanical dynamics of the exoskeleton DC motor are modeled in the lifting optimization formulation. The design variables are human joint angle profiles and exoskeleton motor current profiles. The human joint torque square is minimized subject to physical and lifting task constraints. Then, the lifting optimization problem is solved by the gradient-based sparse nonlinear optimizer (SNOPT). Furthermore, the optimal exoskeleton torque is implemented through a two-phase control strategy to provide optimal assistance in lifting. Experimental validations of the optimal control with 6 Nm and 16 Nm maximum assistive torque are presented. Both 6 Nm and 16 Nm maximum optimal assistance of the exoskeletons reduce the mean values of vastus lateralis, biceps femoris, and latissimus dorsi muscle activations compared to the lifting without the exoskeleton. However, the mean value of the vastus medialis activation is increased by a small amount for the exoskeleton case, although its peak value is reduced. Finally, the experimental results demonstrate that the proposed lifting optimization formulation and control strategy are promising for powered knee exoskeleton for lifting tasks.