No abstract

No abstract

In the present work, the effect of temperature and solution pH on calcium carbonate precipitation from iron‐rich waters was investigated. Calcium carbonate was precipitated by CO2 removal. The increase in the temperature or the solution pH leads to the acceleration of calcium carbonate nucleation and crystal growth. Iron addition retards the formation of calcium carbonate crystals and enhanced the precipitation in the bulk solution. At high supersaturations, the inhibition effectiveness of iron is small and it could be improved by lowering the solution pH. The results of the present work show that it is possible to reduce or completely prevent scale formation in different water treatment processes by controlling the operating parameters which favourably affects the water treatment costs, increases the equipment life and allows increased product water recovery.

A commercial aluminum alloy was subjected to severe plastic deformation through equal channel angular pressing (ECAP). The alloy contains a low volume fraction ofα-AlFeSi located essentially at the grain boundaries. The corrosion behavior of the ECAP’ed alloy was investigated in NaCl solution using potentiodynamic polarization and immersion tests. The effects of scan rate and NaCl concentration on the alloy susceptibility to corrosion were also studied. The results obtained were compared with those of the nonpressed alloy. ECAP leads to an intensive grain refinement accompanied by an increased dislocation density. All electrochemical tests confirm that corrosion resistance of the alloy remarkably diminished with increasing the ECAP number of passes. This is presumably due to the breakdown of theα-AlFeSi after ECAP leading to higher number of galvanic cells and enhanced dissolution of the aluminum matrix.