An experimental program was conducted to investigate the effects of curing time and curing temperature on shear behavior of a sand-bentonite mixture. The specimens were cured at temperatures of 40°C, 60°C and 80°C for 1, 3 and 5 days under 100kPa, 500kPa and 1000kPa confinements. The results of consolidated undrained triaxial shear tests showed that an increase in temperature from 40°C to 80°C at 1, 3 and 5 days of curing increased the shear strength by 25%, 24% and 23%, respectively. Also, the increase in curing time from 1 to 3 and from 1 to 5 days at 80°C increased the shear strength of samples 12% and 24%, respectively. The failure of pre-cured samples occurred in lower strains as a result of more induced brittleness.Moreover, the secant modulus as well as the size of yield loci and critical state line's slope increased by pre-curing. The application of thermal cycles resulted in increasing shear strength and experiencing a negative pore water pressure which shows a transition towards the quasistructured behavior. The results of scanning electron microscopy (SEM) studies confirmed the increase in void ratio during thermal curing.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.