Thin-film dye-sensitized solar cells (DSCs) based on mesoporous semiconductor electrodes are low-cost alternatives to conventional silicon devices. High-efficiency DSCs typically operate as photoanodes (n-DSCs), where photocurrents result from dye-sensitized electron injection into n-type semiconductors. Dye-sensitized photocathodes (p-DSCs) operate in an inverse mode, where dye-excitation is followed by rapid electron transfer from a p-type semiconductor to the dye (dye-sensitized hole injection). Such p-DSCs and n-DSCs can be combined to construct tandem solar cells (pn-DSCs) with a theoretical efficiency limitation well beyond that of single-junction DSCs (ref. 4). Nevertheless, the efficiencies of such tandem pn-DSCs have so far been hampered by the poor performance of the available p-DSCs (refs 3, 5-15). Here we show for the first time that p-DSCs can convert absorbed photons to electrons with yields of up to 96%, resulting in a sevenfold increase in energy conversion efficiency compared with previously reported photocathodes. The donor-acceptor dyes, studied as photocathodic sensitizers, comprise a variable-length oligothiophene bridge, which provides control over the spatial separation of the photogenerated charge carriers. As a result, charge recombination is decelerated by several orders of magnitude and tandem pn-DSCs can be constructed that exceed the efficiency of their individual components.

Bimolecular charge carrier recombination has been clarified in bulk-heterojunction solar cells based on a blend of regioregular poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene using the time-of-flight method. We show how bimolecular recombination influences the charge carrier transport, how it limits the efficiency of low-mobility solar cells, and how to estimate the bimolecular recombination coefficient. We found that bimolecular recombination in these efficient photovoltaic materials is orders of magnitude slower as compared to Langevin recombination expected for low-mobility materials. This effect is inherent to the nanomorphology of the bicontinuous interpenetrating network creating separate pathways for electrons and holes, and paves the way for the fabrication of bulk-heterojunction solar cells where bimolecular recombination is not the limiting factor.

No abstract

The ideal driving force for dye regeneration is an important parameter for the design of efficient dye-sensitized solar cells. Here, nanosecond laser transient absorption spectroscopy was used to measure the rates of regeneration of six organic carbazole-based dyes by nine ferrocene derivatives whose redox potentials vary by 0.85 V, resulting in 54 different driving-force conditions. It was found that the reaction follows the behavior expected for the Marcus normal region for driving forces below 29 kJ mol(-1) (ΔE = 0.30 V). Driving forces of 29-101 kJ mol(-1) (ΔE = 0.30-1.05 V) resulted in similar reaction rates, indicating that dye regeneration is diffusion controlled. Quantitative dye regeneration (theoretical regeneration yield 99.9%) can be achieved with a driving force of 20-25 kJ mol(-1) (ΔE ≈ 0.20-0.25 V).