Metal−organic chemical vapor deposition (MOCVD) is one of the main methodologies used for thin-film fabrication in the semiconductor industry today and is considered one of the most promising routes to achieve large-scale and high-quality 2D transition metal dichalcogenides (TMDCs). However, if special measures are not taken, MOCVD suffers from some serious drawbacks, such as small domain size and carbon contamination, resulting in poor optical and crystal quality, which may inhibit its implementation for the large-scale fabrication of atomic-thin semiconductors. Here we present a growthetch MOCVD (GE-MOCVD) methodology, in which a small amount of water vapor is introduced during the growth, while the precursors are delivered in pulses. The evolution of the growth as a function of the amount of water vapor, the number and type of cycles, and the gas composition is described. We show a significant domain size increase is achieved relative to our conventional process. The improved crystal quality of WS 2 (and WSe 2 ) domains wasis demonstrated by means of Raman spectroscopy, photoluminescence (PL) spectroscopy, and HRTEM studies. Moreover, time-resolved PL studies show very long exciton lifetimes, comparable to those observed in mechanically exfoliated flakes. Thus, the GE-MOCVD approach presented here may facilitate their integration into a wide range of applications.

Manipulation of surface architecture of semiconducting nanowires with a control in surface polarity is one of the important objectives for nanowire based electronic and optoelectronic devices for commercialization. We report the growth of exceptionally high structural and optical quality nonpolar GaN nanowires with controlled and uniform surface morphology and size distribution, for large scale production. The role of O contamination (~1-10^5 ppm) in the surface architecture of these nanowires is investigated with the possible mechanism involved. Nonpolar GaN nanowires grown in O rich condition show the inhomogeneous surface morphologies and sizes (50 - 150 nm) while nanowires are having precise sizes of 40(5) nm and uniform surface morphology, for the samples grown in O reduced condition. Relative O contents are estimated using electron energy loss spectroscopy studies. Size-selective growth of uniform nanowires is also demonstrated, in the O reduced condition, using different catalyst sizes. Photoluminescence studies along with the observation of single-mode waveguide formation, as far field bright violet multiple emission spots, reveal the high optical quality of the nonpolar GaN nanowires grown in the O reduced condition.Comment: 27 Pages, 8 figure, journa

The physicochemical processes at the surfaces of semiconductor nanostructures involved in electrochemical and sensing devices are strongly influenced by the presence of intrinsic or extrinsic defects. To reveal the surface controlled sensing mechanism, intentional lattice oxygen defects are created on the surfaces of GaN nanowires for the elucidation of charge transfer process in methane (CH 4 ) sensing. Experimental and simulation results of electron energy loss spectroscopy (EELS) studies on oxygen rich GaN nanowires confirmed the possible presence of 2 2(O N ) and V Ga -3O N defect complexes. A global resistive response for sensor devices of ensemble nanowires and a localized charge transfer process in single GaN nanowires are studied in situ scanning by Kelvin probe microscopy (SKPM). A localized charge transfer process, involving the V Ga -3O N defect complex on nanowire surface is attributed in controlling the global gas sensing behavior of the oxygen rich ensemble GaN nanowires.

The effect of the seed metal on the optical and chemical properties of the grown TMDs.

Growth of mono-dispersed AlGaN nanowires of ternary wurtzite phase is reported using chemical vapour deposition technique in the vapour-liquid-solid process. The role of distribution of Au catalyst nanoparticles on the size and the shape of AlGaN nanowires are discussed. These variations in the morphology of the nanowires are understood invoking Ostwald ripening of Au catalyst nanoparticles at high temperature followed by the effect of single and multi-prong growth mechanism. Energy-filtered transmission electron microscopy is used as an evidence for the presence of Al in the as-prepared samples. A significant blue shift of the band gap, in the absence of quantum confinement effect in the nanowires with diameter ~ 100 nm, is used as a supportive evidence for the AlGaN alloy formation. Polarized resonance Raman spectroscopy with strong electron-phonon coupling along with optical confinement due to the dielectric