Deterioration of retina and death of the retinal cells due to age, diabetes, or occlusion can cause retinal degeneration which leads to loss of vision. In this study, it is aimed to design a bilayered matrix to mimic the choroid and the Bruch's membrane of the retinal tissue. As choroid, a microchanneled network resembling a fractal tree design was fabricated by photolithography over photo-cross-linkable methacrylated hyaluronic acid hydrogel. Gelatin or collagen was immobilized into the microchannels to enhance adherence of Human Umbilical Vein Endothelial Cells (HUVEC). At late culture periods (2 weeks), formation of tubular structures due to proliferation of the attached cells was observed. As Bruch's membrane, an electrospun fibroin nanofiber mat was produced to grow retinal pigment epithelium (RPE) cells on. Cellular interactions between RPE and HUVEC in the microchannels were investigated in a coculture model in a noncontact mode. It was deduced that by combining the RPE layer on the highly permeable Bruch's membrane with the choroid layer populated by HUVECs, a retinal substitute which might have a potential for use in the treatment of retinal diseases is possible. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2166-2177, 2016.
No abstract
We produced a novel three-dimensional (3D) bone tumor model (BTM) to study the interactions between healthy and tumor cells in a tumor microenvironment, the migration tendency of the tumor cells, and the efficacy of an anticancer drug, Doxorubicin, on the cancer cells. The model consisted of two compartments: (a) a healthy bone tissue mimic, made of poly(lactic acid-co-glycolic acid) (PLGA)/beta-tricalcium phosphate (β-TCP) sponge seeded with human fetal osteoblastic cells (hFOB) and human umbilical vein endothelial cells (HUVECs), and (b) a tumor mimic, made of lyophilized collagen sponge seeded with human osteosarcoma cells (Saos-2). The tumor mimic component was placed into a central cavity created in the healthy bone mimic and together they constituted the complete 3D bone tumor model (3D-BTM). The porosities of both sponges were higher than 85% and the diameters of the pores were 199 ± 52 μm for the PLGA/TCP and 50–150 μm for the collagen scaffolds. The compression Young’s modulus of the PLGA/TCP and the collagen sponges were determined to be 4.76 MPa and 140 kPa, respectively. Cell proliferation, morphology, calcium phosphate forming capacity and alkaline phosphatase production were studied separately on both the healthy and tumor mimics. All cells demonstrated cellular extensions and spread well in porous scaffolds indicating good cell–material interactions. Confocal microscopy analysis showed direct contact between the cells present in different parts of the 3D-BTM. Migration of HUVECs from the healthy bone mimic to the tumor compartment was confirmed by the increase in the levels of angiogenic factors vascular endothelial growth factor, basic fibroblast growth factor, and interleukin 8 in the tumor component. Doxorubicin (2.7 μg.ml−1) administered to the 3D-BTM caused a seven-fold decrease in the cell number after 24 h of interaction with the anticancer drug. Caspase-3 enzyme activity assay results demonstrated apoptosis of the osteosarcoma cells. This novel 3D-BTM has a high potential for use in studying the metastatic capabilities of cancer cells, and in determining the effective drug types and combinations for personalized treatments.
Polyurethanes are known as one of the most biocompatible and inherently blood-compatible materials and have a wide range of applications in the medical field due to their controllable structure and properties. Durability, elasticity, elastomeric structure, fatigue resistance, versatility, and easy acceptance by the biological media after the application makes these polymers preferable in medical area. In this study, polyurethane films were prepared using poly(propylene-ethylene glycol) and either toluene-2,4-diisocyanate or 4,4′-methylenediphenyl diisocyanate without adding any other ingredients such as solvent, catalyst, or chain extender to prevent negative effects of leachable molecules. Mechanical tests were performed at room temperature while swelling tests were conducted in water and phosphate-buffered saline at 4°C, 25°C, and 37°C. Temperature responsiveness was observed for the samples synthesized using toluene-2,4-diisocyanate and poly(propylene-ethylene glycol). These samples had more than 100% swelling at 4°C and about 4% swelling at 25°C and 37°C. Cytocompatibility tests were performed by culturing the samples and their extracts with mouse fibroblast cells (L929). Viability of human umbilical vein endothelial cells was studied to examine the compatibility of the films for blood contacting devices. Both toluene-2,4-diisocyanate and 4,4-methylenediphenyl diisocyanate-based polyurethane films showed no cytotoxic effect and good biocompatibility. Oxygen plasma treatment enhanced hydrophilicity of the films. After plasma treatment, human umbilical vein endothelial cell attachment on toluene-2,4-diisocyanate-based polyurethane films
We produced a three dimensional (3D) bone tumor model (BTM) to study the interactions between healthy and tumor cells in a tumor tissue microenvironment, migration of the tumor cells and the efficacy of an anticancer drug, Doxorubicin, for personalized medicine applications.The model consisted of two compartments: (a) a healthy bone tissue mimic, poly(lactic acid-coglycolic acid) (PLGA)/beta-tricalcium phosphate (β-TCP) sponge that was seeded with human fetal osteoblastic cells (hFOB) and human umbilical vein endothelial cells (HUVECs), and (b) a tumor mimic, a lyophilized collagen sponge that was seeded with human osteosarcoma cells (Saos-2). The tumor component was introduced to a central cavity created in the healthy bone mimic and together they constituted the total 3D model (3D-BTM). The scaffolds were characterized by determining their mechanical properties, studying their topography and stability with compression tests, microCT, SEM, confocal microscopy and gravimetry. Porosities of the sponges were determined from µCT data as 96.7% and 86% for PLGA/TCP and collagen sponges, respectively. The average diameters of the pores were measured by using ImageJ (NIH, USA) as 199±52 µm for PLGA/TCP and 50-150 μm for collagen scaffolds. Young' modulus of the PLGA/TCP and collagen sponges were determined as 4.76MPa and 140kPa, respectively.Cells seeded on the two sponges were studied independently and together on the BTM. Cell proliferation, morphology, calcium phosphate forming capacity and ALP production were studied on both healthy bone and tumor mimics. All types of cells showed cellular extensions and spread on and in the scaffolds indicating good cell-material interactions. Angiogenic developments in BTM were studied along with migration of cells between the components with immunocytochemistry, SEM, microCT, qRT-PCR and agarose gel electrophoresis. Confocal microscopy showed that a direct contact was established between the cells present in different parts of the BTM; and the HUVEC cells within the healthy bone mimic were observed to migrate into the tumor mimic. This was confirmed by the increase in the levels of angiogenic factors VEGF, bFGF, and IL-8 in the tumor component. The IC50 of Doxorubicin on Saos-2 cells was determined as 0.1876 µg.mL -1 . Doxorubicin was administered to the BTM at 2.7 µg.mL -1 concentration and after allowing one day for interaction, the cell number was determined withAlamar Blue cell viability test as 7-fold lesser compared to 24 h earlier. Apoptosis of the osteosarcoma cells was measured by caspase-3 enzyme activity assay. These results demonstrate the suitability of the 3D BTM model for use in the investigation of activities and migrations of cells in a tumor tissue. These will be very useful in studying metastatic capabilities of cells in addition to personalized drug treatments.3
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.