Airborne aerosol samples were collected with an impactor in the Kuwait oil fire plumes in late May 1991. A transmission electron microscope was used to examine the morphology and size distribution of the particles, and an X ray energy spectrometer was used to determine the elemental composition of individual particles. A chemical spot test was used to identify particles containing sulfate. The results show that the dominant particles were (1) agglomerates of spherical soot particles coated with sulfate, (2) cubic crystals containing NaCl and S04=, (3) irregular‐shaped dust containing Si, Al, Fe, Ca, K, and/or S, and (4) very small ammonium sulfate spherules. The concentrations of small sulfate particles increased at higher levels or greater distances from the fire, suggesting the transformation of SO2 gas to sulfate particles by photooxidation followed by homogeneous nucleation. The number of soot, salt, and dust particles that were coated with sulfate increased farther from the fire, and the thickness of the coating increased with altitude. This suggested that gas‐to‐particle conversion had occurred by means of catalytic oxidation combined with heterogeneous nucleation during the plume dispersion. Because the sulfate coating can modify the hydrophobic surfaces of soot and dust particles to make them hydrophilic, most of the particles in the plume apparently were active cloud condensation nuclei that could initiate clouds, fog, and smog, which in turn could affect regional surface temperature, air quality, and visibility. Long‐range air trajectories suggested that some aerosols from the fires could have transported to eastern Asia. It seems possible (but is presently unproven) that a severe flood in China in June was influenced by aerosols from the plumes.

No abstract

No abstract