A reactive extrusion process for the functionalization of polypropylene with maleic anhydride in the presence of supercritical carbon dioxide was studied. Supercritical carbon dioxide was used in this reactive extrusion system to reduce the viscosity of the polypropylene melt phase by forming a polymer-gas solution in order to promote better mixing of the reactants. Subsequently, the effect of supercritical carbon dioxide on the level of grafting, product homogeneity, and molecular weight was evaluated. Analysis of the products revealed that the use of supercritical carbon dioxide led to improved grafting when high levels of maleic anhydride were used. The experimental results showed no evidence of an improvement in the homogeneity of the product, while melt flow rate measurements showed a reduction in the degradation of polypropylene during the grafting reaction when low levels of maleic anhydride were employed.