The formation and properties of laser-induced periodic surface structures (LIPSS) were investigated on carbon fibers under irradiation of fs-laser pulses characterized by a pulse duration  = 300 fs and a laser wavelength  = 1025 nm. The LIPSS were fabricated in an air environment at normal incidence with different values of the laser peak fluence and number of pulses per spot. The morphology of the generated structures was characterized by using scanning electron microscopy, atomic force microscopy and Fast-Fourier transform analyses.Moreover, the material structure and the surface chemistry of the carbon fibers before and after laser irradiation was analyzed by micro Raman spectroscopy and X-ray photoelectron spectroscopy. Large areas in the cm 2 range of carbon fiber arrangements were successfully processed with homogenously distributed high-and low-spatial frequency LIPSS. Beyond 2 those distinct nanostructures, hybrid structures were realized for the very first time by a superposition of both types of LIPSS in a two-step process. The findings facilitate the fabrication of tailored LIPSS-based surface structures on carbon fibers that could be of particular interest for e.g. fiber reinforced polymers and concretes.

Using ultrafast laser excitation and time-correlated single-photon counting techniques, we have measured the collisional mixing rates between the rubidium 5(2)P fine-structure levels in the presence of (4)He gas. A nonlinear dependence of the mixing rate with (4)He density is observed. We find Rb fine-structure transfer is primarily due to binary collisions at (4)He densities of < or = 10(19) cm(-3), while at greater densities, three-body collisions become significant. We determine a three-body collisional transfer rate coefficient (5(2)P(3/2) --> 5(2)P(1/2)) of 1.25(9)x10(-32) cm(6)/s at 22 degrees C.

No abstract