The two landslides are located in the upper reaches of the Jinsha River and both dammed the river. Immediately since the slides, the authors have been working on the slides and help disaster reduction. Based on the data collected by April 2020, this paper is aimed at clarifying the geological condition of the slides and at explaining why the slides occurred and what the whole sliding process was. Conclusions are summarized as follows. First, the two landslides occurred in the suture belt of the Jinsha River and the rocks are composed of tectonic mélange slices of mainly gneiss intermingled with carboniferous slate and marble and with intruded serpentine and granite porphyry. The gneiss generally bears a schistosity plane with an averaged attitude of N47°W/47°, dipping into the slope. Secondly, long-term geomorphological evolution of the bank slope due to river incision contributed to the progressive slope deformation for the development of the "10.10" rockslide. No preferential joints exist in the slope, but alteration and weathering played important roles in its occurrences. Rainfall and earthquakes may also accelerate its deformation. Thirdly, the "10.10" rockslide is of high-speed wedge-like slope failure with a high-position and a high-shear outlet. Its sliding and deposition process demonstrate special features as initial speed, collision between debris, surging waterjet, and second slipping. Fourthly, the whole process of the "10.10" rockslide can be divided into 6 steps, i.e., startup of the major sliding and sliding resistance zones, sliding initiation of the trailing zone, formation of debris-eroded zones, collision of debris and triggering waterjet and mist, secondary slip of the landslide dam, and surface flush in the deposition area. The estimated speed may reach as high as 67 m/s. Fifthly, the "11.3" rockslide follows a different mode, i.e., wedge cleaving effect. And finally, the cracked zones still have the risk to constitute a potential landslide and to dam the river again.

No abstract

About 127 debris flow gullies have been identified, and debris flows have been an important type of geological hazards in Luding County, affecting cities, towns, rural areas, scenic spots and human's engineering projects, such as mining and waterpower utilizing equipments. In this summary paper, recent two catastrophic debris flow events occurred on June 30, 2005, in Chuni town, in the central of the county, and on August 11, 2005, in Hailuogou scenic spot, in the southwest of the county, respectively, are reviewed. The debris flow events are introduced on the basis of field investigation and RS interpretation and the triggering factors for flow occurrence are identified. Furthermore, the rainfall related to flow occurrence including antecedent rainfall and intraday rainfall is analyzed, and a power-law function which can be used as a basic warning line is established based on both antecedent effective rainfall and intraday rainfall. Then dynamic parameters such as flow velocity and flow discharge are calculated, respectively. Through comparison and discussion, some conclusions are made including (1) The antecedent rainfall played an important role for debris flows which generated predominately based on the slope-instability due to the saturated loose sediments; (2) Despite slower flow velocity and smaller magnitude, the slope-type debris flows just like 2005-6-30 debris flows usually lead to serious damages for the difficulty to forecast and to prevent; (3) The mistaken recognition on debris flow hazards and lack of prevention consciousness strengthen the hazard and damage degree. This research is of certain significance for the prevention and mitigation of debris flow hazards and for the planning of the town building and tourism development in the future.

No abstract

No abstract