pH-sensitive hydrogels have been developed greatly over the past few years. This has been possible due to the synthesis of new hydrogel systems with increased sensitivitya sensitivity of up to 10 −5 pH units has already been established. Recently, pH-sensitive hydrogels have shown to be very useful in biomedical applications, such as targeted cancer treatment and treatment of skin lesions. Prolonged drug release has been made available through the use of such hydrogels. The synthesis of pH-sensitive hydrogels is also quick and cost-effective. This review presents a background on the properties of pH-sensitive hydrogels and discusses some of the hydrogels with different sensitivity ranges and their possible applications. A range of synthesis processes have also been briefly introduced along with the fabrication of different structures such as microcantilevers and contact lenses.

Although the manufacturing processes of contact lenses are well established, the use of additive manufacturing for their fabrication opens many new possibilities to explore. The current study demonstrates the fabrication of personalized smart contract lenses utilizing additive manufacturing. The study includes 3-dimensional (3D) modeling of contact lenses with the assistance of a computer aided designing tool based on standard commercial contact lens dimension, followed by the selection of the suitable materials and 3D printing of contact lenses. The 3D printing parameters were optimized to achieve the desired lens geometries, and a post processing treatment was performed to achieve a smooth surface finish. The study also presents functionalized contact lenses with built-in sensing abilities by utilizing microchannels at the contact lens edges. Tinted contact lenses were printed and nanopatterns were textured onto the contact lens surfaces through holographic laser ablation. 3D printed contact lenses have advantages over conventional contact lenses, offering customized ophthalmic devices and the capability to integrate with optical sensors for diagnostics.

Contact lenses are ubiquitous biomedical devices used for vision correction and cosmetic purposes. Their application as quantitative analytical devices is highly promising for point-of-care diagnostics. However, it is a challenge to integrate nanoscale features into commercial contact lenses for application in low-cost biosensors. A neodymium-doped yttrium aluminum garnet (Nd:YAG) laser (1064 nm, 3 ns pulse, 240 mJ) in holographic interference patterning mode was utilized to produce optical nanostructures over the surface of a hydrogel contact lens. One-dimensional (925 nm) and two-dimensional (925 nm × 925 nm) nanostructures were produced on contact lenses and analyzed by spectroscopy and angle-resolve measurements. The holographic properties of these nanostructures were tested in ambient moisture, fully hydrated, and artificial tear conditions. The measurements showed a rapid tuning of optical diffraction from these nanostructures from 41 to 48°. The nanostructures were patterned near the edges of the contact lens to avoid any interference and obstruction to the human vision. The formation of 2D nanostructures on lenses increased the diffraction efficiency by more than 10%. The versatility of the holographic laser ablation method was demonstrated by producing four different 2D nanopattern geometries on contact lenses. Hydrophobicity of the contact lens was characterized by contact angle measurements, which increased from 59.0° at pristine condition to 62.5° at post-nanofabrication. The holographic nanostructures on the contact lens were used to sense the concentration of Na+ ions. Artificial tear solution was used to simulate the conditions in dry eye syndrome, and nanostructures on the contact lenses were used to detect the electrolyte concentration changes (±47 mmol L–1). Nanopatterns on a contact lens may be used to sense other ocular diseases in early stages at point-of-care settings.

The development of accurate and rapid techniques to produce nanophotonic structures is essential in data storage, sensors, and spectroscopy.

Nanofabrication through conventional methods such as electron beam writing and photolithography is time-consuming, high cost, complex, and limited in terms of the materials which can be processed. Here, we present the development of a nanosecond Nd:YAG laser (532 nm, 220 mJ) in holographic Denisyuk reflection mode method for creating ablative nanopatterns from thin films of four ink colors (black, red, blue, and brown). We establish the use of ink as a recording medium in different colors and absorption ranges to rapidly produce optical nanostructures in 1D geometries. The gratings produced with four different types of ink had the same periodicity (840 nm); however, they produce distant wavelength dependent diffraction responses to monochromatic and broadband light. The nanostructures of gratings consisting of blue and red inks displayed high diffraction efficiency of certain wavelengths while the black and brown ink based gratings diffracted broadband light. These gratings have high potential to be used as low-cost photonic structures in wavelength-dependent optical filters. We anticipate that the rapid production of gratings based on different ink formulations can enable optics applications such as holographic displays in data storage, light trapping, security systems, and sensors.