No abstract

No abstract

No abstract

A single-mode single-polarization waveguide (SMSPW) ring resonator for the microoptic gyro (MOG) was proposed, and it could be monolithically integrated onto a silica planar lightwave circuit. We have presented the design of a three-dimensional SMSPW ring resonator in which the TM mode cuts off and the TE mode transmits by taking into consideration the stress-induced birefringence effect of the Si-based silica waveguide using the effective-index method. The characteristics of the light propagation across the SMSPW resonator were studied by a three-dimensional finite difference beam propagation method. Numerical simulation results showed the SMSPW ring resonator has a high extinction ratio over 50 dB cm À1 for the TM mode, low propagation loss of 0.055 dB cm À1 for the TE mode, and a high finesse of 36. A rate detection limit of 0.8 h À1 can be achieved. Without increasing the complexity of the waveguide fabrication process, this structure can solve the MOGs output bias instabilities induced by polarization fluctuations and provide a new solution for MOGs.

An exponentially tapered structure is introduced into multimode interference (MMI) devices. Compared with a parabolically tapered structure, which has been successfully used in MMI devices, this structure can further reduce the length of these devices. The performances of the 2Â2 MMI coupler with exponentially tapered structure, such as the optical transmission, the splitting ratio, the wavelength response and the fabrication tolerance, are investigated by the 2D finite difference beam propagation method. Results show that the exponentially tapered MMI coupler exhibits a similar property to that with a parabolically tapered structure except for the splitting ratio. The exponentially tapered structure can offer a possible application in MMI couplers with a free choice of the splitting ratio.