No abstract

No abstract

Passive radiative cooling (PRC), as an electricity-free and environmentally friendly cooling strategy, is highly desirable in improving the global energy landscape. Despite numerous efforts, most designs for PRC are so devoted to improving the cooling performance in the daytime that they neglect the triggered overcooling at night. Herein, we approached an effective design for temperature-adaptive thermal management through integrating PRC and temperature control of room-temperature phase change material. Compared with conventional radiative coolers, the developed phase change material-enhanced radiative cooler (PCMRC) can adjust its performance according to the temperature of day and night. The PCMRC achieved an average subambient temperature drop of ∼6.3 °C under direct sunlight and an average temperature rise of ∼2.1 °C above ambient temperature at night, as well as a reduced temperature difference between day and night. The temperature-adaptive PCMRC shows great promise for passive radiative cooling regulation, which can further extend the applications of passive radiative cooling.

Diatom frustules (DFs) with delicate hierarchical pores and a large specific surface area are extracted from artificially cultured diatoms, showing their utilization potential as shape-stabilized phase change materials (ss-PCMs). Herein, we successfully prepared a fully biomass-based ss-PCM, superhydrophobic thermal energy storage (STES) coating by employing beeswax (BW) as phase change materials (PCMs) and DFs as supporting materials via a facile spraying method. DFs can adsorb as much as 65 wt % BW without leakage, accompanied with a high heat storage capacity of 112.57 J/g. The thermal stability test demonstrates that the DF/BW coating can undergo 500 heating–freezing cycles with the reduction of the phase change enthalpy being less than 5%. Simultaneously, the DF also endows BW with a higher thermal degradation temperature (from ∼200 to ∼250 °C). In addition, the DF/BW coating shows superhydrophobicity due to the incorporation of the low surface energy of BW and the micro/nanostructures of DFs. This superhydrophobic surface can quickly and repeatedly recover its excellent water repellency through a simple heat treatment (80 °C, 20 min) after being damaged by a water impact or strong acid and alkali corrosion. This self-healing ability can effectively overcome the poor durability of traditional superhydrophobic materials. Our research can expand the application of DFs in the field of ss-PCMs and guide the preparation of durable superhydrophobic surfaces with rapid self-healing performance.

No abstract