This article reports a new process chain for custom-made three-dimensional (3D) porous ceramic scaffolds for bone replacement with fully interconnected channel network for the repair of osseous defects from trauma or disease. Rapid prototyping and especially 3D printing is well suited to generate complex-shaped porous ceramic matrices directly from powder materials. Anatomical information obtained from a patient can be used to design the implant for a target defect. In the 3D printing technique, a box filled with ceramic powder is printed with a polymer-based binder solution layer by layer. Powder is bonded in wetted regions. Unglued powder can be removed and a ceramic green body remains. We use a modified hydroxyapatite (HA) powder for the fabrication of 3D printed scaffolds due to the safety of HA as biocompatible implantable material and efficacy for bone regeneration. The printed ceramic green bodies are consolidated at a temperature of 1250 degrees C in a high temperature furnace in ambient air. The polymeric binder is pyrolysed during sintering. The resulting scaffolds can be used in tissue engineering of bone implants using patient-derived cells that are seeded onto the scaffolds. This article describes the process chain, beginning from data preparation to 3D printing tests and finally sintering of the scaffold. Prototypes were successfully manufactured and characterized. It was demonstrated that it is possible to manufacture parts with inner channels with a dimension down to 450 microm and wall structures with a thickness down to 330 microm. The mechanical strength of dense test parts is up to 22 MPa.

Nowadays, there is a significant need for synthetic bone replacement materials used in bone tissue engineering (BTE). Rapid prototyping and especially 3D printing is a suitable technique to create custom implants based on medical data sets. 3D printing allows to fabricate scaffolds based on Hydroxyapatite with complex internal structures and high resolution. To determine the in vitro behaviour of cells cultivated on the scaffolds, we designed a special test-part. MC3T3-E1 cells were seeded on the scaffolds and cultivated under static and dynamic setups. Histological evaluation was carried out to characterise the cell ingrowth. In summary, the dynamic cultivation method lead to a stronger population compared to the static cultivation method. The cells proliferated deep into the structure forming close contact to Hydroxyapatite granules.

No abstract

Various biomaterials have been developed for the use as bone substitutes for bone defects. To optimize their integration and functionality, they should be adapted to the individual defect. Rapid prototyping is a manufacturing method to tailor materials to the 3D geometry of the defect. Especially 3D printing allows the manufacture of implants, the shape of which can be designed to fit the bone defect using anatomical information obtained from the patient. 3D printing of calcium phosphates, which are well established as bone substitutes, involves a sintering step after gluing the granules together by a binder liquid. In this study, we analyzed if and how these 3D printed calcium phosphate surfaces can be resorbed by osteoclast-like cells. On 3D printed scaffold surfaces consisting of pure HA and β-TCP as well as a biphasic mixture of HA and TCP the osteoclastic cell differentiation was studied. In this regard, cell proliferation, differentiation, and activation were analyzed with the monocytic cell line RAW 264.7. The results show that osteoclast-like cells were able to resorb calcium phosphate surfaces consisting of granules. Furthermore, biphasic calcium phosphate ceramics exhibit, because of their osteoclastic activation ability, the most promising surface properties to serve as 3D printed bone substitute scaffolds.

The 3‐D printing technique was used for the fabrication of HA, TCP and BCP ceramics and the influence of the granulate composition on the 3‐D printed scaffolds was investigated. An optimal composition for 3‐D printing granulates was found. Thus, individual implants can be manufactured via 3‐D printing from different CaP phase compositions to tailor their degradation behavior and osteoconductivity for enhanced bone healing.