Recently the leading-edge tubercles on the pectoral fins of humpback whales have attracted the attention of researchers who wish to exploit this feature in the design of turbine blades to improve the blade performance. The main objective of this paper is therefore to make a further investigation into this biomimetic design inspiration through a fundamental research study involving a hydrofoil section, which represents a straightened tidal turbine blade, with and without the leading-edge tubercles, using computational and experimental methods. Firstly a computational study was conducted to optimise the design of the leading-edge tubercles by using commercial CFD code, ANSYS-CFX. Based on this study the optimum tubercle configuration for a tidal turbine blade with S814 foil cross-section was obtained and investigated further. A 3D hydrofoil model, which represented a "straightened" tidal turbine blade, was manufactured and tested in the Emerson Cavitation Tunnel of Newcastle University to investigate the effect of various tubercle options on the lift and drag characteristics of the hydrofoil. The experiments involved taking force measurements using a 3-component balance device and flow visualisation using a Particle Image Velocimetry (PIV) system. These tests revealed that the leading-edge tubercles may have significant benefits on the hydrodynamic performance of the hydrofoil in terms of an improved lift-to-drag ratio performance as well as reducing the tip vortex which is main cause of the undesirable end-effect of 3D foils. The study explores further potential benefits of the application of leading-edge tubercles on tidal turbine blades
The rising environmental awareness of various adverse emissions by commercial shipping has recently targeted Underwater Radiated Noise (URN) due to its potential impact on marine mammals. Amongst the various sources on-board a commercial ship, cavitation is the dominating one following its inception. In order to ensure acceptable noise levels for sustainable shipping, accurate prediction of the noise signature is vital. Within this framework, a widely utilized method for full-scale noise prediction is to conduct model tests in cavitation tunnels and to extrapolate to full-scale. The aim of this paper is to provide invaluable URN data of a full-scale vessel and its prediction using cavitation tests from a medium-sized tunnel to evaluate the prediction methodology. Extrapolated URN data based on the tunnel tests was compared with the data obtained from the full-scale trials with The Princess Royal in order to assess the prediction methodology. The comparisons indicate that, whilst the ideal experimental approach is to conduct such involving tests with a full-hull model in large cavitation tunnels, the medium size facilities using dummy-hull models with wake screens, can still provide a very useful means for the URN investigations with a rapid turn around and an economical way of conducting such tests
This paper focuses on the study of cavitation and underwater noise performance of a biomimetically improved horizontal axis tidal turbine (HATT) with a leading edge design inspired by the tubercles on the pectoral fins of humpback whales. Systematic model tests were recently conducted and details of this test campaign together with the findings are summarised in the paper. Several full-scale tidal turbine application cases were studied to understand the full-scale operating conditions considering the characteristics of varied kinds of tidal energy devices, the varying wave height and the flood/ebb tide. A systematic test regime was then designed and conducted. A set of tidal turbines with different leading-edge profiles was manufactured and tested under different loading and hence cavitation conditions. During the tests, cavitation was observed and underwater noise level was measured in comparison with the cavitation and noise performance of a counterpart HATT without tubercles. The tested turbines displayed two main types of cavitation patterns independent of the tubercles. These were steady tip vortex cavitation and relatively intermittent cloud cavitation with a misty appearance. The leading-edge tubercles triggered the cavitation onset earlier for the tidal turbine but constrained the cavitation region to the trough between tubercles with a lesser extent on the blades. The noise performance was strongly related to the blade cavitation hence it was influenced by the leading-edge tubercles. While the turbine was working under the non-cavitating conditions the total noise level was similar to the background noise level. With the increase of the tip speed ratio the noise level was increased, while increasing blade pitch angle reduced the noise level due to lower blade loading. Cavitation inception and noise diagrams are provided as a database for future studies
An advanced joint time-frequency analysis procedure to study cavitation-induced noise by using standard series propeller data. Ocean Engineering, 170, 329-350.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.