The loading of a Zn-terephthalate based MOF in the inner cavity as well as on the outer walls of a hollow carbon nanofiber (CNF) creates MOF@CNF hybrids. This hybrid ''MOF@CNF'' displayed improved thermal stability as well as gas adsorption compared to the individual counterparts.

A novel electrocatalyst with excellent Pt dispersion on the inner and outer wall of a carbon nanofiber (CNF) was prepared by a modified polyol process in which both the surface tension and polarity characteristics of the medium were properly adjusted to favor solution entry into the tubular region by capillary filling and homogenous wetting of the inner wall surface by the solvents. The pristine CNF, which possesses inherently active inner wall surface and inactive outer wall surface, lead to selective Pt deposition along the inner wall, whereas activation of the outer wall with chemical functionalization resulted into excellent dispersion of Pt along both the inner and outer walls. Structural and morphological characterizations using high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) revealed that when Pt could be dispersed along the inner as well as the outer walls of CNF, the Pt particle size reduces to almost half as compared to the one with Pt decoration only along a single wall of the substrate material. Further, electrochemical studies using cyclic voltammetry (CV) and rotating disk electrode (RDE) measurements revealed enhanced methanol oxidation and oxygen reduction properties, respectively. The electrochemical active area obtained for the catalyst with both inner and outer wall Pt decoration is nearly two times higher than that corresponding to the one with only inner wall Pt decoration. Similarly, the rate constant for oxygen reduction reaction displayed by this sample was four times higher in comparison with the sample prepared by utilizing only one wall for Pt decoration.

We here demonstrate the formation of bundles of RuO2 nanoneedles (ca. 100 nm diameter) by a template-assisted electrodeposition from aqueous RuCl3 solution under potentiostatic conditions at room temperature. Cyclic voltammetric measurements in 0.5 M H2SO4 show significantly higher redox-related charging behavior for the RuO2 nanoneedles compared to that of the commercial sample, which is also supported by the electrochemical impedance data. A comparison of the specific capacitance reveals a higher value for nanoneedles (3 F/g instead of 0.4 F/g for the bulk), which has been explained on the basis of enhanced reactivity. More interestingly, electrical transport measurements reveal a transition from metallic to semiconducting behavior especially at low-temperature caused by an impurity scattering mechanism. We anticipate that the present simple route for the fabrication of RuO2 nanostructures will be useful to exploit their potentials in various fields such as electrocatalysis, nanoelectronics, and more importantly for designing supercapacitors.

A chain-like assembly of rhodium nanoparticles (5-7 nm mean diameter) has been synthesized from rhodium chloride with the help of polydentate molecules like tartaric and ascorbic acids (1 : 3 in mM scale) as capping agents at room temperature. Subsequent characterization using transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy reveals a unique inter-connected network like features, while their electrochemical behavior using cyclic voltammetry and current-time transient suggests potential applications as electrocatalysts in fuel cells. A significant negative shift in the onset potential as well as higher anodic peak current density for formic acid oxidation on Rhtartaric acid (Rh-TA) as compared to that of bulk Rh metal confirms their higher electrocatalytic activity. Interestingly, the enhancement factor (R) with respect to that of bulk metallic Rh towards formic acid oxidation ranges up to 2000% for Rh-TA and 1200% for Rh-AA (Rh-ascorbic acid) respectively. The composition of Rh nano-chains has been further analyzed with thermogravimetry and Fourier transform infra-red spectroscopy to demonstrate the importance of controlling the chain topology using polyfunctional organic molecules. These findings open up new possibilities for tailoring nanostructured electrodes with potential benefits since the development of a better electrocatalysts for many fuel cell reactions continues to be an important challenge.

Nitrogen-doped (N-doped) hollow carbon nanofiber (CNF) was synthesized by incorporating a nitrogen containing polymer precursor, polybenzimidazole (PBI-BuI), in the inner cavity as well as on the outer walls of the CNF, followed by a high temperature treatment. PBI-BuI incorporation along the inner and outer surface of the CNF was accomplished by synthesizing a low molecular weight polymer by tuning the synthetic parameters. The solution concentration of the PBI-BuI is also varied to facilitate its entry into the CNF by capillary action. The high temperature treatment (700-1000 C) of the resulting CNF-PBI material decomposes the polymer and induces N-doping along the inner and outer surfaces of the CNF. The initial PBI-BuI content and the annealing temperature are also systematically varied to choose the right combination of starting precursors and heat-treatment conditions. Detailed X-ray photoelectron spectroscopy analysis of the samples shows that pyridinictype nitrogen is the major component in all the samples. Electrochemical characterizations of this material using cyclic voltammetry, rotating disc electrode studies and durability analysis demonstrated that this material can act as a metal-free oxygen reduction electrocatalyst with improved oxygen reduction kinetics and stability. It is also revealed that the onset potential, limiting current density, number of transferred electrons, etc. have a strong dependence on the annealing temperature.