Nature's evolution provides a multitude of answers to scientific and key technological challenges such as the light harvesting. In this work, we investigate the optical properties of the unique texture of viola petals for the purpose of improved light harvesting in photovoltaics. We find that crystalline silicon solar cells encapsulated with a transparent coating show a 6% improvement in power conversion efficiency if the viola petal texture is replicated onto the front surface. This gain is based on a broadband enhancement in current generation that originates from the exceptional optical properties of the viola surface texture, combining micro-and nanotexture. The microcones of this hierarchical texture demonstrate strong and broadband light incoupling effects as well as retroreflection capabilities, and the nanowrinkles further decrease the reflection losses. Using rigorous optical simulation, we analyze and explain the working principle ruling the light harvesting properties of this dual-scale texture.

The color conversion efficiency of thin polymeric layers embedding quantum dots (QDs) is limited by their negligible light scattering ability and by the insufficient absorption of the excitation photons. In this study, a route is presented to tackle these optical shortcomings by introducing a tailored network of micropores inside these hybrid films. This is achieved by exploiting the microcellular foaming approach which is rapid, cost effective and only makes use of a green solvent (supercritical carbon dioxide). With an appropriate combination of the applied pressure and temperature during foaming, and by using a proper film thickness, the photoluminescence (PL) intensity is enhanced by a factor of up to 6.6 compared to an equivalent but unfoamed hybrid film made of CdSe/ZnS QDs in a polymethyl methacrylate matrix. Spectroscopic measurements and ray tracing simulations reveal how the porous network assists UV/blue light absorption by the QDs and the subsequent outcoupling of the converted light. The approach improves the PL for various QD concentrations and can be easily scaled up and extended to other polymeric matrices as well as light converting materials.

Integration of light management solutions relying on biodegradable materials in organic light‐emitting devices could assist the development of sustainable light sources or conformable and wearable display technology. Using industrially relevant processing techniques, it is shown that microlens arrays can be seamlessly integrated into flexible and biodegradable cellulose diacetate substrates to facilitate extraction of the trapped substrate modes in light‐emitting electrochemical cells. The substrates are patterned for light extraction and optimized for scalable printing processes in a single step by thermally embossing microlenses with polydimethylsiloxane molds on one substrate surface and simultaneous flattening of the other. Furthermore, by implementing the biopolymer substrate with microlens arrays, the total volume fraction of biodegradable materials in the microlense equipped device is 99.94%. The embossed microstructures on the biopolymer substrates are investigated by means of scanning electron microscopy and the angular light extraction profile of the devices is measured and compared to ray tracing simulations. Light‐emitting electrochemical cells with integrated microlens array substrates achieve an efficiency enhancement factor of 1.45, exceeding conventional organic light‐emitting diodes on glass substrates with laminated microlens arrays (enhancement factor of 1.23).

No abstract

We develop a facile, fast, and cost-effective method based on the electrowetting effect to fabricate concave microlens arrays (MLA) with a tunable height-to-radius ratio, namely aspect ratio (AR). The electric parameters including voltage and frequency are demonstrated to play an important role in the MLA forming process. With the optimized frequency of 5 Hz, the AR of MLA are tuned from 0.057 to 0.693 for an increasing voltage from 0 V to 180 V. The optical properties of the MLA, including their transmittance and light diffusion capability, are investigated by spectroscopic measurements and ray-tracing simulations. We show that the overall transmittance can be maintained above around 90% over the whole visible range, and that an AR exceeding 0.366 is required to sufficiently broaden the transmitted light angular distribution. These properties enable to apply the developed MLA films to correlated-color-temperature (CCT)-tunable light-emitting-diodes (LEDs) to enhance their angular color uniformity (ACU). Our results show that the ACU of CCT-tunable LEDs is significantly improved while preserving almost the same lumen output, and that the MLA with the highest AR exhibits the best ACU performance.