Based on high energy demand of the primary production and losses during secondary production, alternative recycling of aluminum becomes a popular research topic. Compared to both primary and secondary production of aluminum, solid state recycling offers energy savings and reduced material losses during processing by surpassing an inefficient melting step. In this work, a direct recycling route for machining chips via pulsed electric current sintering (PECS) is evaluated. Therefore, necessary processing steps for a complete recycling route are briefly outlined. After cleansing, EN AW 6082 chips, provided by Neuman Aluminium GmbH, Marktl, Austria, are compacted with variable loads and consolidated via PECS on two separate systems to enable a comparison. Produced specimens are examined with density measurements, optical microscopy and the bonding quality is evaluated by Vickers micro-hardness measurements. In combination with elevated temperature and deformation, applied current promotes consolidation amongst chips and improvements in density, hardness and microstructure are achieved. The results of this work clearly show a positive effect of PECS on the bonding amongst chips, but further research will be necessary to separate and understand influences of single processing parameters. Additionally, all processing steps from collection to consolidation have to be taken into account to achieve industrial implementation.