Corrosion control of metals is of technical, economical, environmental, and aesthetical importance. The use of inhibitors is one of the best options of protecting metals and alloys against corrosion. The environmental toxicity of organic corrosion inhibitors has prompted the search for green corrosion inhibitors as they are biodegradable, do not contain heavy metals or other toxic compounds. As in addition to being environmentally friendly and ecologically acceptable, plant products are inexpensive, readily available and renewable. Investigations of corrosion inhibiting abilities of tannins, alkaloids, organic,amino acids, and organic dyes of plant origin are of interest. In recent years, sol-gel coatings doped with inhibitors show real promise. Although substantial research has been devoted to corrosion inhibition by plant extracts, reports on the detailed mechanisms of the adsorption process and identification of the active ingredient are still scarce. Development of computational modeling backed by wet experimental results would help to fill this void and help understand the mechanism of inhibitor action, their adsorption patterns, the inhibitor-metal surface interface and aid the development of designer inhibitors with an understanding of the time required for the release of self-healing inhibitors. The present paper consciously restricts itself mainly to plant materials as green corrosion inhibitors.

No abstract

No abstract

The objective of the present study is to obtain a zinc oxide-(ZnO-) based superhydrophobic surface in a simple and cost-effective manner. Chemical immersion deposition being simple and economical has been adopted to develop modified ZnO coating on glass substrate. Several modifications of ZnO like treatment with alkanoic acid (stearic acid) and fluoroalkylsilane to tune the surface wettability (hydrophobicity) were attempted. The effect of thermal treatment on the hydrophobic performance was also studied. It was observed that thermal treatment at 70• C for 16 hrs followed by immersion in stearic acid resulted in high water contact angle (WCA), that is, a superhydrophobic surface. Thus, a modified ZnO superhydrophobic surface involves the consumption of large amount of electrical energy and time. Hence, the alternate involved the incorporation of low surface energy fluoropolymer polytetrafluoroethylene (PTFE) in the ZnO coating. The immersion deposited ZnO-PTFE composite coating on modification with either stearic acid or fluoroalkylsilane resulted in a better superhydrophobic surface. The coatings were characterized using Scanning Electron Microscope (SEM) for the surface morphology. It was found that microstructure of the coating was influenced by the additives employed. A flower-like morphology comprising of needle-like structure arranged in a radial manner was exhibited by the superhydrophobic coating.