ABSTRACT. Aim of current research was to prepare ibuprofen-poloxamer 407 binary mixtures using fusion method and characterize them for their physicochemical and performance properties. Binary mixtures of ibuprofen and poloxamer were prepared in three different ratios (1:0.25, 1:0.5, and 1:0.75, respectively) using a water-jacketed high shear mixer. In vitro dissolution and saturation solubility studies were carried out for the drug, physical mixtures, and formulations for all ratios in de-ionized water, 0.1 N HCl (pH = 1.2), and phosphate buffer (pH = 7.2). Thermal and physical characterization of samples was done using modulated differential scanning calorimetry (mDSC), X-ray powder diffraction (XRD), and infrared spectroscopy (FTIR). Flow properties were evaluated using a powder rheometer. Maximum solubility enhancement was seen in acidic media for fused formulations where the ratio 1:0.75 had 18-fold increase. In vitro dissolution studies showed dissolution rate enhancement for physical mixtures and the formulations in all three media. The most pronounced effect was seen for formulation (1:0.75) in acidic media where the cumulative drug release was 58.27% while for drug, it was 3.67%. Model independent statistical methods and ANOVA based methods were used to check the significance of difference in the dissolution profiles. Thermograms from mDSC showed a characteristic peak for all formulations with T peak of around 45°C which suggested formation of a eutectic mixture. XRD data displayed that crystalline nature of ibuprofen was intact in the formulations. This work shows the effect of eutectic formation and micellar solubilization between ibuprofen and poloxamer at the given ratios on its solubility and dissolution rate enhancement.

No abstract

Wet milling is a multifunctional and the most common method to prepare a drug nanosuspension for improving the bioavailability of poorly water soluble drugs. A suitable way of preparing a high drug-loaded nifedipine nanosuspension using wet stirred media milling was investigated in the present study. Nifedipine, a poorly water soluble drug, was selected as a model drug to enhance its dissolution rate and oral bioavailability by preparing an appropriate crystalline nanosuspension. Process parameters, such as milling media volume, milling speed and milling time, were optimized using the one variable at a time (OVAT) approach. A similar method was used to select an appropriate polymeric stabilizer and a surfactant from different categories of polymeric stabilizers (HPC SL, HPC SSL Soluplus®, Kollidon VA 64 and HPMC E 15) and surfactants (Poloxamer 407, Kolliphor TPGS and Docusate sodium). A systematic optimization of critical formulation parameters (such as drug concentration, polymer concentration and surfactant concentration) was performed with the aid of the Box-Behnken design. Mean particle size, polydispersity index and zeta potential as critical quality attributes (CQAs) were selected in the design for the evaluation and optimization of the formulation and validation of the improved product. The nifedipine nanosuspension that was prepared using HPC and poloxamer 407 was found to be most stable with the lowest mean particle size as compared with the formulations prepared using other polymeric stabilizers and surfactants. The optimized formulation was further spray-dried and characterized using the Fourier Transform Infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), polarized light microscopy (PLM) and in-vitro dissolution study. Results have shown no interaction between the drug particles and stabilizers, nor a reduction in the crystallinity of drug, nor an increase in the saturation solubility and rapid in vitro dissolution as compared with pure nifedipine crystals. Thus, the current study supports the suitability of the wet stirred media milling method and a combination of HPC SSL and poloxamer 407 as stabilizers for the preparation of nifedipine nanosuspension.

Wet granulation is the most commonly used technique in the pharmaceutical industry for delivering oral solid dosage forms. In wet granulation, the binder solvent is one of the critical factors affecting granule properties. In the current study, an attempt was made to investigate the effect of solvents (aqueous and hydro-alcoholic) on thermal and flow properties of Microcrystalline Cellulose (MCC) granules prepared using two different grades of Hydroxypropyl Methylcellulose (HPMC), which served as an effective binder. The granulation endpoint was evaluated using thermal effusivity sensor. Rheometer and Modulated Differential Scanning Calorimetry (mDSC) was used to study the flow and thermal properties of wet and dried granules. Furthermore, physical characterization was carried out by granule strength, particle size distribution and tablet hardness for all granules under the study. Thermal effusivity sensor results indicate 55% w/w concentration of binder solution as the endpoint by measuring thermal effusivity for both binders. Additionally, powder rheometer results show that the wet granules of hydro-alcoholic batches show greater resistance to flow whereas the dried granules display excellent flow characteristics as evident from Basic flowability energy values and specific energy values. Permeability results suggest that the granules formed with hydro-alcoholic binder solvent exhibit better porosity and permeability. Tablet hardness data showed that tablets formulated using hydro-alcoholic solvent granules have greater hardness than tablets formulated using water based solvent granules. The granule strength for water based granules is relatively higher than that of hydro-alcoholic based granules. mDSC thermograms show a sharp rise in enthalpy value at 55% w/w binder solution which is indicative of a more significant amount of solvent being present on the surface of granules and formation of optimal granules. To summarize, we have determined a technique to measure endpoint determination and simultaneously investigate the role of solvent systems on the rheology of MCC granules, which could assist in selecting an appropriate solvent system for granulation.