No abstract

Self-supported and flexible bacterial cellulose (BC) based hybrid membranes were synthesized and decorated with zinc oxide/multi-walled carbon nanotube (ZnO–MWCNT) composite additives in order to modify and tune their surface and bulk properties. Two types of ZnO–MWCNT additives with different morphologies were used in a wide concentration range from 0 to 90% for BC-based hybrids produced by filtration. The interaction between BC and ZnO–MWCNT and the effect of concentration and morphology of additives on the properties like zeta potential, hydrophilicity, electrical conductivity, etc. would be an important factor in various applications. Furthermore, the as-prepared hybrid membranes were characterized with the use of scanning electron microscopy (SEM), focused ion beam scanning electron microscopy (FIB-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray powder diffraction (XRD) and surface area measurement (BET). Applying the presented synthesis routes, the surface properties of BC-based membranes can be tailored easily. Results reveal that the as-prepared BC–ZnO–MWCNT hybrid membranes can be ideal candidates for different kinds of applications, such as water filtration or catalysts.

Here we report the application of zinc oxide (ZnO) coated multi-walled carbon nanotube (MWCNT) composites in the photocatalytic decomposition of acetaldehyde (AA). Zinc oxide nanoparticles were successfully coated on the multi-walled carbon nanotube via impregnation process using zinc acetate (Zn(CH 3 COO) 2 × 2H 2 O) as precursor and sodium dodecyl sulfate (SDS) treated multiwalled carbon nanotube as raw material under different solvent conditions. The applied solvents during preparation were ethanol (EtOH) and water (H 2 O). As-prepared materials were characterized by thermal analysis (TG), X-ray diffraction (XRD), specific surface area measurement (BET) and transmission electron microscopy (TEM) techniques. Photocatalytic efficiencies of as-prepared composites were investigated in a stationary reactor equipped with UV lamp. Decomposition of acetaldehyde was followed by using gas chromatography (GC). Observations revealed that using impregnation method and different solvents the preparation of ZnO/MWCNT nanocomposites can be controlled easily. The highest degradation rate was achieved with the nanocomposite was synthetized using ethanol as solvent. The photocatalytic experiments revealed that the composite has higher photocatalytic activity than that of both the zinc oxide nanoparticles and the mechanical mixture of multi-walled carbon nanotube and zinc oxide.

No abstract

One of the main challenges in the field of heterogeneous catalysis is the involvement of thin solid films and membranes and their application in flow systems. In this regard, we report here the application of self-supported bacterial cellulose (BC) reinforced nanosized platinum (Pt)/N-doped bamboo-like carbon nanotube (NBCNT) hybrid catalyst membrane with a thickness of 35 ± 5 µm in the hydrogenation of n-butene. To synthetized the BC-NBCNT/Pt nanohybrid membrane catalyst a simple impregnation route was applied in a two-step process. As-prepared material was tested in a continuous flow system and the conversion was followed directly by using Fourier transform infrared spectroscopy. Furthermore, the fabricated films were characterized by scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy and specific surface area measurement (Brunauer–Emmett–Teller). Hydrogenation performance was studied on both single and double films. Results revealed that 97% conversion of n-butene can be achieved using these bacterial cellulose reinforced hybrid membranes. Graphic abstract