Hydrogen is a promising alternative energy carrier that can potentially facilitate the transition from fossil fuels to sources of clean energy because of its prominent advantages such as high energy density (142 MJ kg(-1); ref. 1), great variety of potential sources (for example water, biomass, organic matter), light weight, and low environmental impact (water is the sole combustion product). However, there remains a challenge to produce a material capable of simultaneously optimizing two conflicting criteria--absorbing hydrogen strongly enough to form a stable thermodynamic state, but weakly enough to release it on-demand with a small temperature rise. Many materials under development, including metal-organic frameworks, nanoporous polymers, and other carbon-based materials, physisorb only a small amount of hydrogen (typically 1-2 wt%) at room temperature. Metal hydrides were traditionally thought to be unsuitable materials because of their high bond formation enthalpies (for example MgH(2) has a ΔHf~75 kJ mol(-1)), thus requiring unacceptably high release temperatures resulting in low energy efficiency. However, recent theoretical calculations and metal-catalysed thin-film studies have shown that microstructuring of these materials can enhance the kinetics by decreasing diffusion path lengths for hydrogen and decreasing the required thickness of the poorly permeable hydride layer that forms during absorption. Here, we report the synthesis of an air-stable composite material that consists of metallic Mg nanocrystals (NCs) in a gas-barrier polymer matrix that enables both the storage of a high density of hydrogen (up to 6 wt% of Mg, 4 wt% for the composite) and rapid kinetics (loading in <30 min at 200 °C). Moreover, nanostructuring of the Mg provides rapid storage kinetics without using expensive heavy-metal catalysts.

No abstract

The dynamic responses of a rhodium catalyst and a graphene sheet are investigated upon random excitation with 80 kV electrons. An extraordinary electron microscope stability and resolution allow studying temporary atom displacements from their equilibrium lattice sites into metastable sites across projected distances as short as 60 pm. In the rhodium catalyst, directed and reversible atom displacements emerge from excitations into metastable interstitial sites and surface states Our experiments suggest operating electron microscopes with beam currents as small as zeptoAmperes / nm 2 in a "weak-excitation" approach to improve on sample integrity and allow for time-resolved studies of conformational object changes that probe for functional behavior of catalytic surfaces or molecules.

Efforts have been made to characterize the mechanical properties of carbon nanotubes. Previous work has concentrated on the tubes' longitudinal properties, and studies of their radial properties have lagged behind. We have used a scanning probe microscope with an indentation/scratch function to investigate the radial compression of multiwalled carbon nanotubes under an asymmetric stress. In particular, we have determined the radial compressive elastic modulus at different compression levels and have estimated the compressive strength to be well beyond 5.3 GPa.

Crystalline systems often lower their energy by atom displacements from regular high-symmetry lattice sites. We demonstrate that such symmetry lowering distortions can be visualized by ultrahigh resolution transmission electron microscopy even at single point defects. Experimental investigation of structural distortions at the monovacancy defects in suspended bilayers of hexagonal boron nitride (h-BN) accompanied by first-principles calculations reveals a characteristic charge-induced pm symmetry configuration of boron vacancies. This symmetry breaking is caused by interlayer bond reconstruction across the bilayer h-BN at the negatively charged boron vacancy defects and results in local membrane bending at the defect site. This study confirms that boron vacancies are dominantly present in the h-BN membrane.