Zinc oxide nanoparticles (ZnO NPs) were synthesized by a precipitation method, and a new charring–foaming agent (CFA) N-ethanolamine triazine-piperazine, melamine polymer (ETPMP) was synthesized via nucleophilic substitution reaction by using cyanuric chloride, ethanolamine, piperazine, and melamine as precursor molecules. FTIR and energy-dispersive X-ray spectroscopy (EDS) studies were employed to characterize and confirm the synthesized ETPMP structure. New intumescent flame retardant epoxy coating compositions were prepared by adding ammonium polyphosphate (APP), ETPMP, and ZnO NPs into an epoxy resin. APP and ETPMP were fixed in a 2:1 w/w ratio and used as an intumescent flame-retardant (IFR) system. ZnO NPs were loaded as a synergistic agent in different amounts into the IFR coating system. The synergistic effects of ZnO NPs on IFR coatings were systematically evaluated by limited oxygen index (LOI) tests, vertical burning tests (UL-94 V), TGA, cone calorimeter tests, and SEM. The obtained results revealed that a small amount of ZnO NPs significantly increased the LOI values of the IFR coating and these coatings had a V-0 ratings in UL-94 V tests. From the TGA data, it is clear that the addition of ZnO NPs could change the thermal degradation behaviors of coatings with increasing char residue percentage at high temperatures. Cone calorimeter data reported that ZnO NPs could decrease the combustion parameters including peak heat release rates (PHRRs), and total heat release (THR) rates. The SEM results showed that ZnO NPs could enhance the strength and the compactness of the intumescent char, which restricted the flow of heat and oxygen.
A simple and highly efficient protocol for the synthesis of derivatives 7, 7-dimethyl-4-phenyl-2-thioxo-2, 3, 4, 6, 7, 8-hexahydro-1H-quinazoline-5-one from 5, 5-dimethyl cyclohexane-1, 3-dione (4a–4h) (dimedone) has been described. The aryl aldehydes were substituted with thiourea in the presence of synthesized zinc ferrite nanocatalyst, which increased the yield under reflux through condensation, followed by cyclization to give desired products. The other advantages are that it is eco-friendly and economically affordable for large-scale production. Structural validation and characterization of all the newly synthesized compounds were evaluated by spectral analysis (mass spectrometry, proton nuclear magnetic resonance (1HNMR), and Carbon-13 nuclear magnetic resonance(13CNMR)spectroscopies. The structure of antibacterial and antifungal assays was performed with the newly synthesized compounds. The antimicrobial activity of title compounds possessing electron-withdrawing groups such as (4e–4h) (Cl, Br, and cyano group) exhibited more active potential than the electron-donating groups, C6H5,4-C6H4, 3-OC2H5-4OH-C6H3, etc., (4a–4d) containing moiety.
AIMS:
A series of six 4-benzylidene-2-((1-phenyl-3,4-dihydro isoquinoline-2(1H)-yl)methyloxazol-5(4H)-one
derivatives were synthesized by condensation of substituted aryl aldehydes with 2-(2-(1-phenyl-3,4-dihydro
isoquinoline-2(1H)-acetamido)acetic acid in the presence of sodium acetate, acetic anhydride and zinc oxide as a
catalyst.
BACKGROUND:
Novel Synthesis of 4-Benzylidene-2-((1-phenyl-3,4-dihy droisoquinoline-2(1H)-
yl)methyl)oxazol-5(4H)-one derivatives using 1,2,3,Tetrahydroisoquinoline and their Antimicrobial Activity.
OBJECTIVE:
The title compounds can be synthesized from 1,2,3,4-tetrahydroisoquinoline.
METHOD:
The target molecules i.e. 4-benzylidene-2-((1-phenyl-3, 4-dihydro isoquinoline-2(1H)-yl) methyl)oxazol5(4H)-one derivatives (8a-8f) have been synthesized from 1,2,3,4-tetrahydroisoquinoline which was prepared from
benzoic acid in few steps.
RESULT:
All the six compounds were evaluated based on advanced spectral data (1H NMR, 13C NMR &
LCMS) and the chemical structures of all compounds were determined by elemental analysis.
CONCLUSION:
Antibacterial activity of the derivatives was examined for the synthesized compounds and results
indicate that compound with bromine substitution has a good activity profile.
Ethylenediamine modified ammonium polyphosphate (EDA-MAPP) and charring-foaming agents (CFA) were prepared using a simple chemical method and further used to make intumescent flame retardant coatings based on epoxy resin. The content of MAPP and CFA was fixed at a ratio of 2:1. Nanoparticles of magnesium aluminate (MgAl2O4 NPs) have been introduced into the flame retardant coating formulation in various quantities to evaluate the promotional action of MgAl2O4 NPs with a flame retardant coating system. The promotional action of MgAl2O4 NPs on the flame retardant coating formulation was studied using a vertical burning test (UL-94V), limiting oxygen index (LOI), thermogravimetric analysis (TGA) and Fourier transform infra-red spectroscopy (FTIR). The UL-94V results indicated that the addition of MgAl2O4 effectively increased flame retardancy and met the V-0 rating at each concentration. The TGA results revealed that the incorporation of MgAl2O4 NPs at each concentration effectively increased the thermal stability of the flame retardant coating system. Cone-calorimeter experiments show that MgAl2O4 NPs effectively decreased peak heat release rate (PHRR) and total heat release (THR). The FTIR results indicated that MgAl2O4 NPs can react with MAPP and generate a dense char layer that prevents the transfer of oxygen and heat.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.