Geiger-mode avalanche photodiode (Gm-APD) array LiDAR has become the current research focus due to its sensitive response, high precision, and easy integration. However, due to the limitations of the fabrication process and manufacturing cost, the images collected by Gm-APD array LiDAR have very serious image low-resolution problems. Since the intensity map and depth map of the target can be obtained simultaneously by relying on single-source data from Gm-APD array LiDAR, we propose a Gm-APD LiDAR single-source data self-guided method. We propose to first perform Gm-APD LiDAR intensity map superresolution, and then use the processed intensity map with the corresponding depth map for guided superresolution. The advantage of this process is that instead of using high-resolution (HR) imaging devices from different domains, it relies only on single-source data from Gm-APD LiDAR to obtain HR depth map, thus eliminating the need for additional image registration work and providing wider applicability. We investigate the feasibility of the proposed singlesource data processing method and evaluate our method on the real Gm-APD LiDAR single-source data with an average peak signal-to-noise ratio of 42.21, which better preserves the original distance information of the targets while providing visually sharper outputs.

No abstract

In this paper, a ground target extraction system for a novel LiDAR, airborne streak tube imaging LiDAR (ASTIL), is proposed. This system depends on only a single echo and a single data source, and can achieve fast ground target extraction. This system consists of two modules: Autofocus SSD (Single Shot MultiBox Detector) and post-processing. The Autofocus SSD proposed in this paper is used for object detection in the ASTIL echo signal, and its prediction speed exceeds that of the original SSD by a factor of three. In the post-processing module, we describe in detail how the echoes are processed into point clouds. The system was tested on a test set, and it can be seen from a visual perspective that satisfactory results were obtained for the extraction of buildings and trees. The system mAPIoU = 0.5 is 0.812, and the FPS is greater than 34. The results prove that this ASTIL processing system can achieve fast ground target extraction based on a single echo and a single data source.

No abstract