A reliable, accurate, and yet simple dynamic model is important to analyzing, designing, and controlling hybrid rigid–continuum robots. Such models should be fast, as simple as possible, and user-friendly to be widely accepted by the ever-growing robotics research community. In this study, we introduce two new modeling methods for continuum manipulators: a general reduced-order model (ROM) and a discretized model with absolute states and Euler–Bernoulli beam segments (EBA). In addition, a new formulation is presented for a recently introduced discretized model based on Euler–Bernoulli beam segments and relative states (EBR). We implement these models in a Matlab software package, named TMTDyn, to develop a modeling tool for hybrid rigid–continuum systems. The package features a new high-level language (HLL) text-based interface, a CAD-file import module, automatic formation of the system equation of motion (EOM) for different modeling and control tasks, implementing Matlab C-mex functionality for improved performance, and modules for static and linear modal analysis of a hybrid system. The underlying theory and software package are validated for modeling experimental results for (i) dynamics of a continuum appendage, and (ii) general deformation of a fabric sleeve worn by a rigid link pendulum. A comparison shows higher simulation accuracy (8–14% normalized error) and numerical robustness of the ROM model for a system with a small number of states, and computational efficiency of the EBA model with near real-time performances that makes it suitable for large systems. The challenges and necessary modules to further automate the design and analysis of hybrid systems with a large number of states are briefly discussed.

Observing human motion in natural everyday environments (such as the home), has evoked a growing interest in the development of on-body wearable sensing technology. However, wearable sensors suffer from motion artefacts introduced by the non-rigid attachment of sensors to the body, and the prevailing view is that it is necessary to eliminate these artefacts. This paper presents findings that suggest that these artefacts can, in fact, be used to distinguish between similar motions, by exploiting additional information provided by the fabric motion. An experimental study is presented whereby factors of both the motion and the properties of the fabric are analysed in the context of motion similarity. It is seen that while standard rigidly attached sensors have difficultly in distinguishing between similar motions, sensors mounted onto fabric exhibit significant differences (p < 0.01). An evaluation of the physical properties of the fabric shows that the stiffness of the material plays a role in this, with a trade-off between additional information and extraneous motion. This effect is evaluated in an online motion classification task, and the use of fabric-mounted sensors demonstrates an increase in prediction accuracy over rigidly attached sensors.

Learning from Demonstration depends on a robot learner generalising its learned model to unseen conditions, as it is not feasible for a person to provide a demonstration set that accounts for all possible variations in non-trivial tasks. While there are many learning methods that can handle interpolation of observed data effectively, extrapolation from observed data offers a much greater challenge. To address this problem of generalisation, this paper proposes a modified Task-Parameterised Gaussian Mixture Regression method that considers the relevance of task parameters during trajectory generation, as determined by variance in the data. The benefits of the proposed method are first explored using a simulated reaching task data set. Here it is shown that the proposed method offers far-reaching, low-error extrapolation abilities that are different in nature to existing learning methods. Data collected from novice users for a real-world manipulation task is then considered, where it is shown that the proposed method is able to effectively reduce grasping performance errors by ∼ 30% and extrapolate to unseen grasp targets under realworld conditions. These results indicate the proposed method serves to benefit novice users by placing less reliance on the user to provide high quality demonstration data sets.

Within the last decade, running has become one of the most popular physical activities in the world. Although the benefits of running are numerous, there is a risk of Running Related Injuries (RRIs) of the lower extremities. Electromyography (EMG) techniques have previously been used to study causes of RRIs, but the complexity of this technology limits its use to a laboratory setting. As running is primarily an outdoors activity, this lack of technology acts as a barrier to the study of RRIs in natural environments. This study presents a minimally invasive wearable muscle sensing device consisting of jogging leggings with embroidered surface EMG (sEMG) electrodes capable of recording muscle activity data of the quadriceps group. To test the use of the device, a proof of concept study consisting of N = 2 runners performing a set of 5 km running trials is presented in which the effect of running surfaces on muscle fatigue, a potential cause of RRIs, is evaluated. Results show that muscle fatigue can be analysed from the sEMG data obtained through the wearable device, and that running on soft surfaces (such as sand) may increase the likelihood of suffering from RRIs.

The low-cost manufacturing and maintenance of prostheses is of vital importance to their successful deployment in developing countries. Low-cost prosthesis actuation is generally achieved by combining pre-programmed control strategies, with surface-electromyographic measurements taken from the residual limb. In a standard setting, these signals are measured with disposable gel electrodes. However, this limit on electrode reuse requires that prosthesis users have a stable supply of electrodes. Alternatively, the textile electrodes sewn from conductive thread are studied in the context of hand gesture recognition to consider their future use with low-cost prostheses. In this paper, it is demonstrated that textile electrodes can be applied for gesture recognition. To do so, surface electromyography (sEMG) experiments are run in South Africa on three amputees where they were asked to perform gestures with their phantom limb (i.e., the missing limb segment). A gesture recognition method is implemented, and the classification accuracy with data recorded from textile electrodes is compared to that from gel electrodes. Further analysis examining the relationship between classifier performance and physiological parameters are performed. Results show that textile electrodes can be used to perform accurate gesture recognition, and are comparable to disposable gel electrodes. This demonstrates that low-cost sensory systems are not barrier to myoelectric control in developing countries.