No abstract

No abstract

No abstract

The quantity of microorganisms that may be transferred to a food that comes into contact with a contaminated surface depends on the density of microorganisms on the surface and on the attachment strengths of the microorganisms on the materials. We made repeated contacts between pieces of meat and various surfaces (stainless steel and conveyor belt materials [polyvinyl chloride and polyurethane]), which were conditioned with meat exudate and then were contaminated with Listeria monocytogenes, Staphylococcus sciuri, Pseudomonas putida, or Comamonas sp. Attachment strengths were assessed by the slopes of the two-phase curves obtained by plotting the logarithm of the number of microorganisms transferred against the order number of the contact. These curves were also used to estimate the microbial population on the surface by using the equation of A. Veulemans, E. Jacqmain, and D. Jacqmain (Rev. Ferment. Ind. Aliment. 25:58-65, 1970). The biofilms were characterized according to their physicochemical surface properties and structures. Their exopolysaccharide-producing capacities were assessed from biofilms grown on polystyrene. The L. monocytogenes biofilms attached more strongly to polymers than did the other strains, and attachment strength proved to be weaker on stainless steel than on the two polymers. However, in most cases, it was the population of the biofilms that had the strongest influence on the total number of CFU detached. Although attachment strengths were weaker on stainless steel, this material, carrying a smaller population of bacteria, had a weaker contaminating capacity. In most cases the equation of Veulemans et al. revealed more bacteria than did swabbing the biofilms, and it provided a better assessment of the contaminating potential of the polymeric materials studied here.When bacteria attach to surfaces and colonize them, their phenotypes change. They show, for instance, a decreased susceptibility to disinfectant (41, 42) and an increased exopolysaccharide production (46), and the community they form is called a biofilm. Biofilms are an integral part of our environment. In some cases they can be used in bioreactors to process waste; in other cases they cause malfunctions of one kind or another. The formation of biofilms creates major problems in such activities as water distribution (biofilms form in the distribution networks) (2, 10), health care (11, 13), and the food industry (7,8,14). A study by Haeghebaert et al. (24) has suggested that 40.5% of all food-borne infection outbreaks registered in France in 1996 were linked to contamination by equipment, highlighting the hazard that biofilms represent. In this study we examined biofilms liable to cause problems in the meat industry. Many studies have shown that when animals are slaughtered, microbial flora remains on the surface of the carcasses (5, 21), and despite the decontamination processes carried out (scorching the skin or using hot water, organic acid, or phosphate solutions), part of the microflora survives (3, 52). This resident fl...

Three bacterial strains (Kocuria sp. C714.1, Brevibacterium linens B337.1 and Staphylococcus sciuri CCL101) were grown together on stainless steel and were subjected daily to a commercial alkaline chlorine solution (22 mg l-1 of free chlorine, pH 11) over a period of 4 weeks. After the daily chemical shock, culture madia [1:20 dilution of tryptic soy broth (TSB-YE/20) or diluted whey] was deposited on the biofilms. The chemical shocks led first to a drop in the culturable population, followed by an increase and finally stabilization at around 106-107 CFU cm-2 by day 11 of the experiment. These changes in the microbial population can be attributed to a decreasing susceptibility to the antimicrobial agent with biofilm age, and to the consumption of free chlorine by biofilm exoproteins. The microbial composition appeared to be linked to the free chlorine concentration that depended on exoprotein production. At the end of the experiment, exoprotein production was greater for biofilms grown in TSBYE/20 than in whey. As a consequence, biofilms grown in whey did not neutralize the chlorine and the dominant strain was the one having the highest resistance to chlorine: K. varians. When biofilm were grown in TSBYE/20, chlorine was neutralized and the dominant strain was the one having the highest growth rate: S. sciuri. The presence of chlorine may also explain the distribution of S. sciuri cells as a ring around Kocuria sp. microcolonies. When chlorine was totally consumed by the biofilm during the chemical shock, S. sciuri was no longer grouped around Kocuria sp. microcolonies but was evenly scattered over the substratum as single cells or in small clusters, as it was before any chemical treatment. These findings strongly suggest protection of S. sciuri by Kocuria sp. microcolonies against the chlorinated solution. This phenomenon, added to the low susceptibility phenotype of the biofilm cells, could at least partly explain the survival of microbial cells in an adverse environment.