In recent years, regulating a wind energy conversion system (WECS) under fluctuating wind speed and enhancing the quality of the electricity provided to the grid has become a hard challenge for many academics. The current research provides a better control strategy to decrease the occurrence of chattering phenomena. Combined with the Maximum Power Point Tracking (MPPT) strategy and a pitch angle control, the control is possible to increase the performance and the efficiency of the Permanent Magnet Synchronous Generator (PMSG) based Wind Energy Conversion System. This study attempts initially to regulate the generator and the grid side converter to track the wind speed reference established by the MPPT algorithm. And secondly, to relieve the chattering problem associated with the conventional sliding mode control (CSMC), the proposed sliding mode control (PSMC) is based on a novel smooth continuous switching control. Besides, the suggested sliding mode control stability is confirmed using Lyapunov’s stability function. The complete system was evaluated in the MATLAB/Simulink (MathWorks, Natick, MA, USA) environment using a 2 MW PMSG’s power, under random fluctuations in the wind speed to show the suggested approach’s efficiency and robustness, which was then compared to the CSMC and other common approaches available in the literature. The simulation results reveal that the recommended sliding mode control approach delivers good speed, accuracy, stability, and output current’s ripple.

There has always been a high expectation that wind generation systems would capture maximum power and integrate properly with the grid. Utilizing a wind generation system with increased management to meet the growing electricity demand is a clever way of accomplishing this. However, wind power generation systems require a sophisticated, unique, and dependable control mechanism in order to achieve stability and efficiency. To improve the operation of the wind energy conversion method, researchers are continually addressing the obstacles that presently exist. Therefore, it is necessary to know which control can improve the whole system’s performance and ensure its successful integration into the network, despite the variable conductions. This article examines wind turbine control system techniques and controller trends related to the permanent magnet synchronous generator. It presents an overview of the most popular control strategies that have been used to control the PMSG wind power conversion system. Among others, we mention nonlinear sliding mode, direct power, backstepping and predictive currents control. First, a description of each control is presented, followed by a simulation performed in the Matlab/Simulink environment to evaluate the performance of each control in terms of reference tracking, response time, stability and the quality of the signal delivered to the network under variable wind conditions. Finally, to get a clear idea of the effect of each control, this work was concluded with a comparative study of the four controls.

Due to the increase in electricity and diesel costs, solar photovoltaic pumping systems have become a good solution, especially in rural areas. This work presents a standalone photovoltaic (PV) water pumping system (PVWPS) driven by an induction motor without energy storage to improve the pumping system’s performance. First, a comparison is made between two types: perturb and observe (P&O) method and incremental conductance (INC) MPPT method with a variable step size that is automatically adjusted. Studying these two techniques helps to understand which one can result in a system with less oscillation and greater efficiency when tracking the maximum power point from the PV panel under sudden irradiation conditions. This MPPT works on the operating duty cycle of the boost converter. Then, that converter combines with a voltage source inverter (VSI) to convert DC power to AC power. Second, we use indirect field-oriented control (IRFOC), which drives the three-phase of an induction motor in turn to run the centrifugal pump. The simulation results of this work were obtained using the MATLAB Simulink platform.

No abstract

In this work, we are interested in improving the performance of a doubly-fed induction generator (DFIG)-based wind system, by applying a sliding mode control strategy. The objective is the regulation of the active and reactive power, also the voltage and the frequency of the signal injected into the distribution network. The model proposed for the control is based on the sliding mode technique with performance estimators. The proposed model was validated by a simulation on MATLAB/Simulink.