No abstract

No abstract

No abstract

The ef®cient compression of radiographic images is of importance for improved storage and network utilization in support of picture archiving and communication systems (PACS) applications. The DICOM Working Group 4 adopted JPEG2000 as an additional compression standard in Supplement 61 over the existing JPEG. The wavelet-based JPEG2000 can achieve higher compression ratios with less distortion than the Discrete Cosine Transform (DCT)-based JPEG algorithm. However, the degradation of JPEG2000-compressed computed radiography (CR) chest images has not been tested comprehensively clinically. The authors evaluated the diagnostic quality of JPEG2000-compressed CR chest images with compression ratios from 5:1 to 200:1. An ROC (receiver operating characteristic analysis) and t test were performed to ascertain clinical performance using the JPEG2000-compressed images. The authors found that compression ratios as high as 20:1 can be utilized without affecting lesion detectability. Significant differences between the original and the compressed CR images were not recognized up to compression ratio of 50:1 within a con®dence level of 99%.

This paper presents design details adopting open embedded systems (OES) as real-time controllers in industrial distributed control systems. OES minimize development cost and enhance portability while addressing widely known shortcomings of their proprietary counterparts. These shortcomings include the black box method of distribution which hinders integration to more complex systems. However, OES are highly dependent on the compatibility of each software components and essential benchmarking is required to ensure that the system can satisfy hard real-time constraints. To address these issues and the notion that OES will find broader distributed control applications, we provide detailed procedures in realizing OES based on an open source real-time operating system on various low-cost open embedded platforms. Their performance was evaluated and compared in terms of periodicity and schedulability, task synchronization, and interrupt response time, which are crucial metrics to determine stability and reliability of real-time controllers. Practical implementations, including the modernization of a multi-axis industrial robot controller, are described clearly to serve as a comprehensive reference on the integration of OES in industrial distributed control systems.