Abstract. The SeQ codes has advantages, such as variable cross-correlation property at any given number of users and weights, as well as effectively suppressed the impacts of phase induced intensity noise (PIIN) and multiple access interference (MAI) cancellation property. The result revealed, at system performance analysis of BER = 10 -09 , the SeQ code capable to achieved 1 Gbps up to 60 km.

Abstract. Optical Code Division Multiple Access (OCDMA) has been important with increasing demand for high capacity and speed for communication in optical networks because of OCDMA technique high efficiency that can be achieved, hence fibre bandwidth is fully used. In this paper we will focus on Sequential Algorithm (SeQ) code with AND detection technique using Optisystem design tool. The result revealed SeQ code capable to eliminate Multiple Access Interference (MAI) and improve Bit Error Rate (BER), Phase Induced Intensity Noise (PIIN) and orthogonally between users in the system. From the results, SeQ shows good performance of BER and capable to accommodate 190 numbers of simultaneous users contrast with existing code. Thus, SeQ code have enhanced the system about 36% and 111% of FCC and DCS code. In addition, SeQ have good BER performance 10 -25 at 155 Mbps in comparison with 622 Mbps, 1 Gbps and 2 Gbps bit rate. From the plot graph, 155 Mbps bit rate is suitable enough speed for FTTH and LAN networks. Resolution can be made based on the superior performance of SeQ code. Thus, these codes will give an opportunity in OCDMA system for better quality of service in an optical access network for future generation's usage

<span>This paper presents a new class of Sequential Algorithm (SeQ) code for Optical Code Division Multiple Access (OCDMA) system. The SeQ code has advantages of various cross – correlation property at any given number of users, and code weights. The result shown, at error floor BER = 10-09, the SeQ code capability to support 190 numbers of simultaneous users was higher than those achieved by FCC (W=4), DCS (W=4) and MFH (W=4). SeQ code excellently support 190 number of users due to due to the arrangement of code algorithm and flexibility cross-correlation (0 and 1) role. In addition, SeQ code capable to support up to 70 km for bit rate 155 Mbps in comparison 622 Mbps, 1 Gbps, and 2 Gbps be able to support 40km, 30km and 20km respectively. Hence, we can ascertain that PIIN and MAI are successfully eliminated for SAC-OCDMA coding system.</span>

No abstract