A container was developed for the transport and conservation of immunological products under low temperatures of between 2 and 8 º C, within a time span of 8 hours. The container is practical, simple and userfriendly, and can be used in places without electric power, and all these advantages are added of low operational costs. The container proposed aims at meeeting the demand of the Programa Nacional de Imunizações (PNI- the National Immunization Program), through Cold Chain, which sets the standards for all the procedures concerning conservation, handling, distribution and transport of the vaccine from the laboratory that produces it to the moment of inoculation.Innitially, the container was specifically developed for Vaccine for Inactive Influenza Virus against flu, which, according to a survey conducted with laboratories, is the most widely consumed, and whose conservation time span is also applicable to other immunobiologicals After the design and construction of the prototype, the container was exhaustively tested under different weather conditions. The results of the experiment are being exposed and discussed in this paper and the prototype lived up to the expectations of the reserachers in terms of the time spans and temperatures foreseen for the conservation of the vaccine selected.

The pressure control valves can perform different functions in the hydraulic systems, such as: establish maximum pressure, reduce pressure in some circuit lines, and establish sequence movements, among other functions. The main operation of these valves consists of providing a balance between pressure and the force load on a spring. Most of these valves can be positioned in many different levels, between totally open and totally closed, depending on the flow and on the pressure differential. The pressure control valves are usually named according to their primary functions, e.g., lock wire valve, sequence valve, safety valve, etc. and, their basic function is limit or to determine the pressure of the hydraulic system for the attainment of a certain function of the equipment in motion. They are also classified by the type of connections, by the size and by the selected pressure band. Instead of relief and security, discharge, counterbalance, sequence, reducing and shock suppressor valves represent the pressure control devices. In this paper, oil-hydraulic circuits are suggested for practical lessons of Hydraulic and Pneumatic Commands where they regulate valves of pressure, by acting in the following situations: limiting the maximum pressure of the system, determining a level of pressure, determining two different levels of pressure, determining at the same time two distinct levels of pressure, unloading the pump. The functions of these devices will be discussed and analyzed as an attempt to improve their position in the circuit.

No abstract