No abstract

No abstract

Apressure relief valveis a safety device designed to protect a pressurized vessel or system during an over-pressure event. An overpressure event refers to any condition which would cause pressure in a vessel or system to increase beyond the specified design pressure or maximum allowable working pressure. Many electronic, pneumatic and hydraulic systems exist today to control fluid system variables, such as pressure, temperature and flow. Each of these systems requires a power source of some type, such as electricity or compressed air in order to operate. A pressure relief valve must be capable of operating at all times, especially during a period of power failure when system controls are nonfunctional. The sole source of power for the pressure relief valve, therefore, is the process fluid.

Centrifugal compressors of turbochargersoperate in a wide range of rotational speeds, which depends on the load of the supercharged engine. Current designs of turbocharger compressors exhibit high efficiencies accompanied by high flow capacities [1]. Consequences of aerodynamic optimization are high mean stress values in the blades due to centrifugal loading as well as dynamic stresses due to blade vibrations. Blade vibrations in a turbocharger compressor are assumed to be predominantly excited by unsteady aerodynamic forces [2]. These forces are caused by a variety of sources influencing the flow. Examples include the geometry of the flow channel, elbows, the diffuser vanes or struts. Therefore, an understanding of FSI is essential for further design optimizations.