One approach to the tissue engineering of vascular structures is to develop in vitro conditions in order ultimately to fabricate functional vascular tissues before final implantation. In our experiment, we aimed to develop a new combined cell seeding and perfusion system that provides sterile conditions during cell seeding and biomechanical stimuli in order to fabricate autologous human vascular tissue in vitro. The cell seeding and perfusion system is made of Plexiglas and is completely transparent (Berlin Heart, Berlin, Germany; University Hospital Benjamin Franklin, Berlin, Germany). The whole system consists of a cell seeding chamber that can be incorporated into the perfusion system and an air-driven respirator pump connected to the bioreactor. The cell culture medium continuously circulates through a closed-loop system. We thus developed a cell seeding device for static and dynamic seeding of vascular cells onto a polymeric vascular scaffold and a closed-loop perfused bioreactor for long-term vascular conditioning. The cell seeding chamber can be easily connected to the bioreactor, which combines continuous, pulsatile perfusion and mechanical stimulation to the tissue-engineered conduit. Adjusting the stroke volume, the stroke rate, and the inspiration/expiration time of the ventilator allows various pulsatile flows and different levels of pressure. The whole system is a highly isolated cell culture setting, which provides a high level of sterility and a gas supply and fits into a standard humidified incubator. The device can be sterilized by ethylene oxide and assembled with a standard screwdriver. Our newly developed combination of a cell seeding and conditioning device provides sterile conditions and biodynamic stimuli for controlled tissue development and in vitro conditioning of an autologous tissue-engineered vessel.

Our results suggest that the re-creation and reproduction of complex vascular structures by computer-aided design techniques may be useful to fabricate custom-made polymeric scaffolds for the tissue engineering of living vascular prostheses.

Objectives The persistent shortage of donor organs for lung transplantation illustrates the need for new strategies in organ replacement therapy. Pulmonary tissue engineering aims at developing viable hybrid tissue for patients with chronic respiratory failure. Methods Dual-chamber polymer constructs that mimic the characteristics of the pulmonary air-blood interface were fabricated by microfabrication techniques using the biocompatible polymer polydimethylsiloxane. One compartment (“vascular chamber”) was designed as a capillary network to mimic the pulmonary microvasculature. The other compartment (“parenchymal chamber”) was designed to permit gas exchange. Immortalized mouse lung epithelium cells (MLE-12) were cultured on the surface of polystyrene microcarrier beads. These beads were subsequently injected into the parenchymal chamber of the dual-chamber microsystems. The vascular compartment was perfused with cell culture medium in a bioreactor and the construct was maintained in culture for 1 week. Results The microcarriers evenly distributed MLE-12 cells on the parenchymal compartment surface. Confluent cell layers were confirmed by fluorescent and electron microscopy. Adequate proliferation of MLE-12 cells within the construct was monitored via the DNA content. Viability of the cells was maintained over 1 week. Finally, cellular specificity and functional capacity in situ were demonstrated by immunostaining for proSP-B and proSP-C (alveolar epithelium), and by using MLE-12 cells transfected to overexpress green fluorescent protein. Conclusion We conclude that functional hybrid microsystems mimicking the basic building plan of alveolar tissue can be engineered in vitro.