The outcome of the present study and data of recently published studies show that periradicular surgery may result in a predictable treatment outcome in molars with persistent periradicular lesions.

Achieving sufficient mechanical purchase of pedicle screws in osteoporotic or previously instrumented bone is technically and biologically challenging. Techniques using different kinds of pedicle screws or methods of cement augmentation have been used to address this challenge, but are associated with difficult revisions and complications. The purpose of this biomechanical trial was to investigate the use of biocompatible textile materials in combination with bone cement to augment pullout strength of pedicle screws while reducing the risk of cement extrusion. Pedicle screws (6/40 mm) were either augmented with standard bone-cement (Palacos LV + G) in one group (BC, n = 13) or with bone-cement enforced by Vicryl mesh in another group (BCVM, n = 13) in osteoporosis-like saw bone blocks. Pullout testing was subsequently performed. In a second experimental phase, similar experiments were performed using human cadaveric lumbar vertebrae (n = 10). In osteoporosis-like saw bone blocks, a mean screw pullout force of 350 N (±125) was significantly higher with the Bone cement (BC) compared to bone-cement enforced by Vicryl mesh (BCVM) technique with 240 N (±64) (p = 0.030). In human cadaveric lumbar vertebrae the mean screw pullout force was 784 ± 366 N with BC and not statistically different to BCVM with 757 ± 303 N (p = 0.836). Importantly, cement extrusion was only observed in the BC group (40%) and never with the BCVM technique. In vitro textile reinforcement of bone cement for pedicle screw augmentation successfully reduced cement extrusion compared to conventionally delivered bone cement. The mechanical strength of textile delivered cement constructs was more reproducible than standard cementing. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:212-216, 2018.