The kinetics, morphology and composition of the formation of TCP phases in an experimental alloy containing no tungsten is studied. At high temperature P phase forms after 20 h, whereas below 950°C the phases p and R occur. At lower temperatures a polycrystalline form of cr phase is observed which is meta-stable but acts as a nucleation site for the other phases. The phase occurrence and compositions are compared with a thermodynamic model using a rhenium-containing database, and reasonable agreement is found for the P, R and cs phases. However the model underestimates the stability of the p phase.

An isothermal section of the Fe-Mo-Ti ternary system at 1000°C has been constructed using data acquired from a series of seven alloys. The limit of solubility of Fe in the continuous A2 phase field between Ti and Mo has been determined, as have the extents to which Mo may be accommodated in the B2 TiFe phase, and Ti in the D85 Fe7Mo6 phase. The B2, D85 and C14 Fe2Ti intermetallics were found to have limited tolerance for non-stoichiometric compositions. The positions of the A2+B2+C14 and A2+C14+D85 three-phase fields were determined, along with the extents of the A2+B2, A2+D85, A2+C14, C14+B2 and C14+D85 two-phase fields. No ternary phases were observed in any of the alloys studied.

No abstract

No abstract

The recently developed Refractory Metal High Entropy Superalloys have the potential to replace Ni-based alloys in very high temperature structural applications. However, the microstructures of these new alloys typically consist of refractory metal based solid solution precipitates within an ordered superlattice structured matrix, which is likely to compromise key properties such as toughness. As such, there is significant interest in inverting this arrangement, such that superlattice precipitates form within a disordered refractory metal matrix. Yet the mechanisms by which these microstructures form and how they might be modified with compositional variations are currently unclear. To elucidate these mechanisms, the microstructural evolution of a series of compositionally simpler alloys from the Ti-Ta-Zr system have been studied following long term exposures at 700, 900 and 1000˚C. Exposures of up to 1000 hours were used as a proxy to equilibrium and the resulting microstructures were analysed using advanced scanning and transmission electron microscopy methods. The microstructures of these alloys were found to predominantly contain one or two bcc phases, the lengthscale and morphology of which changed with exposure temperature. From these results it is established that the fine-scale microstructure, which is very similar to that widely reported in the more compositionally complex refractory metal high entropy superalloys, forms via spinodal decomposition during cooling. It is also shown, for the first time, how compositional modification can lead to a refractory metal solid solution based matrix. It is believed that these results provide key insights that can guide further development in the more complex systems that will be required for commercial applications.