A new fast reciprocating probe system (FRPS) has been built and installed on the outer midplane of the EAST tokamak to investigate the profiles of the boundary plasma parameters such as electron density and temperature. The system consists of a two-stage motion drive mechanism: slow motion and fast motion. The fast motion is powered by a servo motor, which drives the probe horizontally up to 50 cm to scan the edge region of the EAST tokamak. The maximum velocity achieved is 2 m/s. High velocity and flexible control of the fast motion are the remarkable features of this FRPS. A specially designed connector installed at the front end of the probe shaft makes it easy to install or replace the probe head on FRPS. During the latest experimental campaign in the spring of 2010, a probe head with seven tips, including two tips for a Mach probe, has been used. An example is given for simultaneous profile measurements of the plasma temperature, plasma density, and the plasma flow velocity.

The controlling of plasma shape and position are essential to the success of Tokamak discharge. A real-time image acquisition system was designed to obtain plasma radiation image during the discharge processes in the Experimental Advanced Superconducting Tokamak (EAST) device. The hardware structure and software design of this visible camera system are introduced in detail. According to the general structure of EAST and the layout of the observation window, spatial location of the discharging plasma in the image was measured. An improved Sobel edge detection algorithm using iterative threshold was proposed to detect plasma boundary. EAST discharge results show that the proposed method acquired plasma position and boundary with high accuracy, which is of great significance for better plasma control.