An experimental study of the heat transfer characteristics between single lines of circular jets and concave cylindrical surfaces is presented. It is intended to model a practically important class of impingement cooling configurations for which existing heat transfer correlations are not obviously applicable. The results clarify the present uncertain position with regard to the optimum spacing between the jet nozzle and the heat transfer surface and with regard to the center-to-center spacing between the jets. Some limited results for a two-dimensional jet impinging on the concave surfaces are also presented.

An experimental study of the heat transfer characteristics of impingement into cavities which model the cooled leading edges of gas turbine engine airfoils is presented. The study includes both two-dimensional slot jets and single lines of evenly-spaced circular jets. For broad cylindrical cavities correlations are given for the maximum heat transfer rates attainable with optimum positioning of the jet nozzle with respect to the cooled surface. For elongated narrow cavities heat transfer rates relative to these maximum values are presented for a variety of cavity shapes.

Thirty‐five percent of consulting room unpreserved saline bottles with jet dispensers were found to be microbially contaminated within two weeks of use. This increased to fifty‐five percent of bottles after 4–6 weeks of use. The advantages and disadvantages of each form of unpreserved saline storage are discussed and recommendations for practitioner guidance given.

No abstract