Graphene application within electrochemical sensing has been widely reported, but mainly as a composite, which adds summative effects to an underlying electrode. In this work we report the use of laser-scribed graphene as a distinct electrode patterned on a non-conducting flexible substrate. The laser-scribed graphene electrode compared favourably to established carbon macroelectrodes when evaluating both inner sphere and outer sphere redox probes, providing promise of extensive utility as an electrochemical sensor. The laser-scribed graphene electrode demonstrated the fastest heterogeneous electron transfer rate of all the electrodes evaluated with a k(0) of 0.02373 cm s(-1) for potassium ferricyanide, which exceeds commercially available edge plane pyrolytic graphite at 0.00260 cm s(-1), basal plane pyrolytic graphite at 0.00033 cm s(-1) and the very slow and effectively irreversible electrochemistry observed using single layer graphene. Finally and most significantly, a proof of principle system was fabricated using the laser-scribed graphene as working electrode, counter electrode and underlying base for the Ag/AgCl reference electrode, all in situ on the same planar flexible substrate, removing the requirement of macroscale external electrodes. The planar three electrode format operated with the same optimal electrode characteristics. Furthermore, the fabrication is inexpensive, scalable and compatible with a disposable biosensor format, considerably widening the potential applications in electrochemical bio-sensing for laser-scribed graphene.

Complementary metal oxide semiconductor (CMOS) technology has made personal mobile computing and communications an everyday part of life. In this paper we present a nanophotonic integrated CMOS-based biosensor that will pave the way for future personalized medical diagnostics. To achieve our aim, we have monolithically integrated plasmonic nanostructures with a CMOS photodiode. Following this approach of monolithic nanophotonics–microelectronics integration, we have successfully developed a miniaturized nanophotonic sensor system with direct electrical readout, which eliminates the need of bulky and costly equipment that is presently used for interrogation of nanophotonic sensors. The optical sensitivity of the plasmonic nanostructures is measured to be 275 nm/refractive index unit (RIU), which translates to an electrical sensitivity of 5.8 V/RIU in our integrated sensor system. This advance is the first demonstration of monolithic integration of nanophotonic structures with CMOS detectors and is a crucial step toward translating laboratory based nanophotonic sensing systems to portable, low-cost, and digital formats.

This paper deals with design and fabrication of graphene micro-Hall devices along with driving and processing electronics to construct a highly sensitive graphene magnetometer system. Graphene micro-Hall elements were fabricated by implementing microfabrication techniques. Custom driving and processing circuitry was designed and built on a printed circuit board (PCB) and integrated with fabricated graphene Hall devices; reducing the offset equivalent magnetic field and greatly improving the sensitivity. The performance parameters were quantitatively analyzed for characterizing the sensitivity in terms of linearity, current-related sensitivity, and magnetic field resolution. The potential of graphene magnetometers for detection capability of low fields has been demonstrated with a current related sensitivity of 2540 V/AT and magnetic field resolution of 162 nT/√Hz.

Monolithic integration of nanophotonic sensors with CMOS detectors can transform the laboratory based nanophotonic sensors into practical devices with a range of applications in everyday life. In this work, by monolithically integrating an array of gold nanodiscs with the CMOS photodiode we have developed a compact and miniaturized nanophotonic sensor system having direct electrical read out. Doing so eliminates the need of expensive and bulky laboratory based optical spectrum analyzers used currently for measurements of nanophotonic sensor chips. The experimental optical sensitivity of the gold nanodiscs is measured to be 275 nm/RIU which translates to an electrical sensitivity of 5.4 V/RIU. This integration of nanophotonic sensors with the CMOS electronics has the potential to revolutionize personalized medical diagnostics similar to the way in which the CMOS technology has revolutionized the electronics industry.