No abstract

Approximate matrix inversion based on Neumann series has seen a recent increased interest motivated by massive MIMO systems. There, the matrices are in many cases diagonally dominant, and, hence, a reasonable approximation can be obtained within a few iterations of a Neumann series. In this work, we clarify that the complexity of exact methods are about the same as when three terms are used for the Neumann series, so in this case, the complexity is not lower as often claimed. The second common argument for Neumann series approximation, higher parallelism, is indeed correct. However, in most current practical use cases, such a high degree of parallelism is not required to obtain a low latency realization. Hence, we conclude that a careful evaluation, based on accuracy and latency requirements must be performed and that exact matrix inversion is in fact viable in many more cases than the current literature claims.

In this work we explore the trade-offs between established algorithms for symmetric matrix inversion for fixed-point hardware implementation. Inversion of symmetric positive definite matrices finds applications in many areas, e.g. in MIMO detection and adaptive filtering. We explore computational complexity and show simulation results where numerical properties are analyzed. We show that LDLT decomposition combined with equation system solving are the most promising algorithm for fixed-point hardware implementation. We further show that simply counting the number of operations does not establish a valid comparison between the algorithms as the required word lengths differ significantly

No abstract

In this paper, a fast Fourier transform (FFT) hardware architecture optimized for field-programmable gate-arrays (FPGAs) is proposed. We refer to this as the single-stream FPGA-optimized feedforward (SFF) architecture. By using a stage that trades adders for shift registers as compared with the single-path delay feedback (SDF) architecture the efficient implementation of short shift registers in Xilinx FPGAs can be exploited. Moreover, this stage can be combined with ordinary or optimized SDF stages such that adders are only traded for shift registers when beneficial. The resulting structures are well-suited for FPGA implementation, especially when efficient implementation of short shift registers is available. This holds for at least contemporary Xilinx FPGAs. The results show that the proposed architectures improve on the current state of the art.