We numerically study coupling of light into silicon (Si) on glass using different square and hexagonal sinusoidal nanotextures. After describing sinusoidal nanotextures mathematically, we investigate how their design affects coupling of light into Si using a rigorous solver of Maxwell's equations. We discuss nanotextures with periods between 350 nm and 1050 nm and aspect ratios up to 0.5. The maximally observed gain in the maximal achievable photocurrent density coupled into the Si absorber is 7.0 mA/cm² and 3.6 mA/cm² for a layer stack without and with additional antireflective silicon nitride layers, respectively. A promising application is the use as smooth anti-reflective coatings in liquid-phase crystallized Si thin-film solar cells.

We report on enhanced fluorescence of lead sulfide quantum dots interacting with leaky modes of slab-type silicon photonic crystals. The photonic crystal slabs were fabricated supporting leaky modes in the near infrared wavelength range. Lead sulfite quantum dots which are resonant the same spectral range were prepared in a thin layer above the slab. We selectively excited the leaky modes by tuning wavelength and angle of incidence of the laser source and measured distinct resonances of enhanced fluorescence. By an appropriate experiment design, we ruled out directional light extraction effects and determined the impact of enhanced excitation. Threedimensional numerical simulations consistently explain the experimental findings by strong near-field enhancements in the vicinity of the photonic crystal surface. Our study provides a basis for systematic tailoring of photonic crystals used in biological applications such as biosensing and single molecule detection, as well as quantum dot solar cells and spectral conversion applications.

All-inorganic CsPbBr3 perovskite colloidal quantum dots have recently emerged as promising material for a variety of optoelectronic applications, among others for multi-photon-pumped lasing. Nevertheless, high irradiance levels are generally required for such multi-photon processes.One strategy to enhance the multi-photon absorption is taking advantage of high local light intensities using photonic nanostructures. Here, we investigate two-photon-excited photoluminescence of CsPbBr3 perovskite quantum dots on a silicon photonic crystal slab. By systematic excitation of optical resonances using a pulsed near-infrared laser beam, we observe an enhancement of two-photon-pumped photoluminescence by more than one order of magnitude when comparing to using a bulk silicon film. Experimental and numerical analyses allow relating these findings to near-field enhancement effects on the nanostructured silicon surface. The results reveal a promising approach for significant decreasing the required irradiance levels for multiphoton processes being of advantage in applications like low-threshold lasing, biomedical imaging, lighting and solar energy.

Machine learning techniques can reveal hidden structure in large data amounts and can potentially extent or even replace analytical scientific methods. In nanophotonics, modes can increase the light yield from emitters located inside the nanostructure or near the surface. Optimizing such systems enforces to systematically analyze large amounts of three-dimensional field distribution data. We present a method based on finite element simulations and machine learning for the identification of modes with large field energies and specific spatial properties. By clustering we reduce the field distribution data to a minimal subset of prototypes. The predictive power of the approach is demonstrated using an analysis of experimentally measured fluorescence enhancement of quantum dots on a photonic crystal surface. The clustering method can be used for any optimization task that depends on three-dimensional field data, and is therefore relevant for biosensing, quantum dot solar cells or photon upconversion.