The newéchelle spectrograph FLECHAS (Fibre Linked ECHelle Astronomical Spectrograph) is in operation at the Nasmyth-focus of the 0.9 m telescope of the University Observatory Jena. FLECHAS is equipped with a sensitive backilluminated and midband coated CCD-detector, as well as with a calibration unit for flatfield and wavelength-calibration. The spectrograph covers the spectral range between about 3900 and 8100Å and exhibits a resolving power of R ∼ 9300. In this article all technical characteristics of FLECHAS are described and examples of the first astronomical observations obtained with the new instrument in July 2013 at the University Observatory Jena are presented, among them the first light spectra taken with FLECHAS, simultaneous imaging and spectroscopic observations, the determination of the detection limit of the instrument, the spectroscopy of stars of different spectral types and of faint extended objects, as well as the Li-line detection in the spectra of young solar-like stars.

We present PUCHEROS, the high-resolution echelle spectrograph, developed at the Center of Astro-Engineering of Pontificia Universidad Catolica de Chile to provide an effective tool for research and teaching of astronomy. The instrument is fed by a single-channel optical fibre and it covers the visible range from 390 to 730 nm in one shot, reaching a spectral resolution of about 20 000. In the era of extremely large telescopes our instrument aims to exploit the capabilities offered by small telescopes in a cost-effective way, covering the observing needs of a community of astronomers, in Chile and elsewhere, which do not necessarily need large collecting areas for their research. In particular the instrument is well suited for long-term spectroscopic monitoring of bright variable and transient targets down to a V magnitude of about 10. We describe the instrument and present a number of text case examples of observations obtained during commissioning and early science.

No abstract

In this article we present the Data Flow System (DFS) for the Very Large Telescope Interferometer (VLTI). The Data Flow System is the VLT end-to-end software system for handling astronomical observations from the initial observation proposal phase through the acquisition, processing and control of the astronomical data. The Data Flow System was first installed for VLTI first fringes utilising the siderostats together with the VINCI instrument and is constantly being upgraded in phase with the VLTI commissioning. When completed the VLT Interferometer will make it possible to coherently combine up to three beams coming from the four VLT 8.2m telescopes as well as from a set of initially three 1.8m Auxiliary Telescopes, using a Delay Line tunnel and four interferometry instruments. Observations of objects with some scientific interest are already being carried out in the framework of the VLTI commissioning using siderostats and the VLT Unit Telescopes, making it possible to test tools under realistic conditions. These tools comprise observation preparation, pipeline processing and further analysis systems. Work is in progress for the commissioning of other VLTI science instruments such as MIDI and AMBER. These are planned for the second half of 2002 and first half of 2003 respectively. The DFS will be especially useful for service observing. This is expected to be an important mode of observation for the VLTI, which is required to cope with numerous observation constraints and the need for observations spread over extended periods of time.

No abstract